A piece of ball valve is a relatively new type of ball valve, it has its own unique advantages, such as no friction switch, sealing is not easy to wear, opening and closing torque is small.This reduces the size of the supplied actuator.Equipped with a multi-turn electric actuator, the medium can be adjusted and cut off strictly.It is widely used in the condition of strict cut off of water supply and drainage in petrochemical industry.

 

The fluid resistance is small, and the resistance coefficient is the same as the length of the pipe section.

 

Simple structure, small size and light weight.

 

Compact and reliable, the current ball valve sealing material is widely used in plastic, good sealing, in the vacuum system has also been widely used.

 

Easy to operate, fast open and close, from full open to full close only rotation 90°, convenient for remote control.

 

Easy maintenance, simple ball valve structure, sealing ring is generally active, disassembly and replacement are relatively convenient.

 

When fully open or fully closed, the sealing surface of the ball and seat is isolated from the media, which will not cause erosion of the valve sealing surface when passing through.

 

Wide range of applications, sizes from small to a few millimeters, large to a few meters, from high vacuum to high pressure can be applied.When the ball rotates 90 degrees, the inlet and outlet should all appear spherical, so as to cut off the flow.

 

The working principle of

First, start the process

 

1 In the closed position, the ball is pressed against the seat by mechanical pressure from the stem.

 

When turning the handwheel counterclockwise, the stem reverses motion, with its bottom angular plane causing the ball to detach from the seat.

 

The stem continues to lift and interacts with the guide pin in the stem spiral groove to initiate frictionless rotation of the ball.

 

Up to full open position, stem lifted to limit position, ball rotated to full open position.

 

Second, close the process

 

When closed, turn handle clockwise, stem begins to descend and causes ball to leave seat to begin rotation.

 

Continue to rotate the handwheel with the stem acting on a guide pin embedded in the spiral groove above to simultaneously rotate the stem and the ball by 90°.

 

3 The ball has rotated 90° without contact with the seat when it is about to close.

 

For the last few turns of the 4 handwheels, the angular plane at the bottom of the stem mechanically wedges against the ball, causing it to press tightly against the seat for complete sealing.

 

Structural characteristics of

 

1. Open and close without friction.This function completely solves the problem of traditional valve sealing due to friction between sealing surfaces.

 

2. Jacket structure.The valve installed on the pipeline can be directly inspected and maintained online, which can effectively reduce device shutdown and cost.

 

3. Single seat design.The problem of abnormal pressure boost in the medium of the valve affecting the safety of operation is eliminated.

 

4. Low torque design.Specially designed stem with a small handle valve can be easily opened and closed.

 

5. Wedge sealing structure.The valve is provided by the stem of the mechanical force, the ball wedge pressure on the seat and sealing, so that the valve sealing is not affected by the pipeline differential pressure changes, sealing performance in various working conditions are reliable guarantee.

 

6. Self-cleaning structure of sealing surface.When the ball leans away from the seat, the fluid in the pipeline passes through the ball sealing surface in a 360° uniform way, which not only eliminates the local flushing of high-speed fluid on the seat, but also washes away the accumulation on the sealing surface to achieve the purpose of self-cleanin