Ge-1060h is a large mechanical feeder developed according to the market demand, and its silo capacity is three times of that of ordinary feeder. It can be used for the screw whose diameter is m1.0-m6.0 mm and length is less than or equal to 20 mm. The whole machine is fed to the track by the rotary table driven by the motor. After the track is aligned, it is sent to the 4 dividing discs realized by the stepper motor by direct vibration. The dividing discs separate the screws on the track one by one and stop at the reclaiming position. After the screw is vacuum sucked by the automatic locking screw locking die group, the dividing discs divide the screws in sequence Send to reclaiming position.

1. It is suitable for screw whose diameter is M1.0 ～ M6.0 mm and length is less than or equal to 20 mm. The capacity of silo is 3 times of that of common version.

2. It is suitable for pneumatic reclaiming of automatic screw locking machine.

3. The whole machine is fed to the track by the rotary table driven by the motor. After the track is aligned, it is sent to the 4 dividing discs realized by the stepper motor through direct vibration. The dividing discs separate the screws on the track one by one and then stop at the reclaiming position. After the screws are vacuum sucked by the automatic locking screw locking die group, the dividing discs send the back screws to the reclaiming position in sequence.

4. It is suitable for screws with length diameter ratio ≤ 1 and screws with elastic flat pad.

5. Through the digital display panel, the vibration size, feeding speed, material arrival delay and other parameters can be adjusted, and the number of screws can be recorded.