Description of Wellcold Slurry Ice Machines:

Slurry ice, a type of ice in slurry form, is a mixture of millions of tiny ice crystals and aqueous solution (usually as brine water, seawater or ethylene glycol ). It is a unique chilling medium and is formed out of seawater of a mixture of fresh water and salt. The microscopic crystals form a suspension in seawater in any required concentration.

Due to its special semi fluid state, slurry ice is also called fluid ice, flowing and liquid ice.

Wellcold offers two different methods to produce slurry ice: brine water with 3.2% salinity and seawater directly.

 

Slurry ice completely covers the fish, chilling the fish instantly and has the greater chilling characteristics up to 15 to 20 times better than conventional block ice.

Wellcold slurry ice machine can be also used as high efficient sea water cooler.

 

Applications of Wellcold Slurry Ice Machines:

• Preservation of marine and aquatic products;
• Reservation of perishable goods like fish and poultry;
• Supermarket presservation;
• Ice storage air conditioning system;
• Industrial refrigeration;

 

Wellcold Slurry Ice Machine features:

• Compact structure, space-saving, simple installation.
• Stainless steel 316 is used in all contact areas which meets all food processing standards and has strong corrosion resistance to sea water.
• Multi-functional: can be designed for both shipboard and land-based applications.
• Slurry ice can wrap frozen products completely thereby ensuring a rapid and efficient cooling performance with low power input.
• High latent energery: slurry ice is binary mixture of water and ice crystals with a high heat interchanging capacity amounting to 80kcal/kg.
• Low energy cost: the producing of slurry ice is 2 times engery saving than tranditioinal ice making. In adddition, the slurry ice can be stored in thermal storing reservoirs and approved by the heat department for being resued later on. It allows you to produce the slurry ice in the electricity off-peak when the electricity charge is cheaper and use them in the peak time, which can save you the electricity cost.
• The largest contact surface with the products to be chilled. Slurry ice is at sub-zero temperature, which makes the slurry ice fast chill the product to be temperature around 0°C. Once the liquid surplus is drained, the pruduct is left totally surrounded by smooth, round ice and consequently protected from the versatile enviroment.
• It increases the chilling speed up to 200% compared with traditional ice.
• Extend the fresh time of food. Extend the fresh time of fish, meat to get enhanced quality and better price. Due to the round shape of the crystals and the absence of sharp edges and the fast cooling of the products, slurry ice becomes ideal for application directly on the pruduct to be chilled so avoiding any damage to the product, which can improve the qulity and appearance of fish or meat.
• More hygienic ice quality: The ice is always stored into thermal storage reservoirs and pumped through the pipes so there is no posibility to polluted by air-borne dust or other contaminant deposited on the exposed parts of the tanks.
• Human energy saving: one of the main advantages of this system is easy distribution. Due to its tiny crystals and pumpability, the slurry ice has the property to flow through small tubes and holes, so it can be pumped through rigid and flexible pipes from its generation point up or down to its application point, basically not limited by the destination of the end-user.
• Lower infrastructure cost: The necessary ancillary equipments for the slurry ice machine is less as it does not need facilities below:
  a. Load-bearing facilities of great ice silos.
  b. Mechanical system to remove the ice from the silos.
  c. Light tanks to transport the ice to final destination.
  d. Electic or gasoline trucks.
  e. Maintenence of the facilities, especially the moving parts.
  f. Conveyor belt for the ice

 

Wellcold Slurry Ice Machine Technical Parameter:

Model	WPS-1T/W	WPS-2T/W	WPS-3T/W	WPS-5T/W	WPS-10T/W
Ice daily productive capacity	1000 kg/day	2000 kg/day	3000 kg/day	5000 kg/day	10000 kg/day
Ambient temp.	+25℃
Water inlet temp.	+18℃
Cooling capacity	2.8 KW	5.8 KW	14.5 KW	22.0 KW	28.5 KW
Operating power	1.8 KW	4.0 KW	7.0 KW	12.0 KW	14.0 KW
Installation power	2.5 KW	8.07 KW	10.16 KW	18.2 KW	20.3 KW
Weight	290 kg	390 kg	520 kg	680 kg	780 kg
Water source to make ice	Clean sea water
Cooling type	Water cooling
Compressor	Bitzer
	GEA Bock/Refcomp/Frascold are avalible
Power supply	3P/380V/50HZ
	3P, 220V/440V/460V, 50HZ/60HZ is avalible

Tips: 

1. Standard working condition: +25℃ ambient temperature, 18℃ inlet water temperature, and 40℃ condensing temperature.

2. Above metioned parameters will be changed subject to technical invotation without future notice. Specific parameters please refer to the quotation.

 

Commercial items of Wellcold Slurry Ice Machine:

1. Price term: FOB / CFR /CIF are all accepeted.

2. Stanard payment terms: By T/T, 30% as deposit after order confirmed, balance 70% will be paid before delivery. 

3. Warranty period: 12 Months after B/L date. Any failure occurred within the period due to our responsibility, we’ll supply you the spare parts for free, and permanent technical support & consultation all life long for the machines.

4. After-sales Service Provided: Free spare parts, Field installation, commissioning and training, Video technical support, Online support, Engineers available to service overseas.

5. Package: Standard exporting wooden case .

6. Delivery time: Within 15-25 working days after deposit.

 

Why to choose Wellcold Slurry Ice Machines:

1. Professional manufacturer: better price, faster delivery.

2. CE certificate, strict quality testing.

3. Long-term warranty: 12 months.

4. Satisfied after-sale service with professional team.

5. Have ability to offer professional design according to your request with professional technical team.

6. Use world-famous brand accessories for main parts to ensure ice machine stable quality.

7. Compact structure, humanized design, automatic control system, fault alarm and all protecting device make the machine work longer, safer, simpler as well as more energy-saving, smaller place occupation.

8. OEM and ODM can be accepted.