Model: FSG-H818CNC/FSG-B818CNC

Brand: Taiwan Fuyu CHEVALIER

Product name: CNC surface grinder, online dynamic balance

​

 

Machinery Introduction

FSG-H818CNC· FSG-B818CNC High-efficiency CNC Forming Grinding Machine

FSG-H818CNC & FSG-B818CNC This series is a high-precision, high-efficiency, multi-functional profile grinder equipped with a spindle servo motor and CNC control. Assembling dozens of engineers from various departments, in response to the current and future development of precision industry, the needs of complex shapes, difficult-to-grind materials, and high precision and high efficiency, the design is suitable for the processing of molds, machinery, automobiles, aviation, and electronic parts. And automated production.

High precision

In order to achieve high precision of 0.001mm, the front and rear mechanisms of this machine adopt linear bearing tracks, and precision-grade ball screws are driven by servo motors to achieve high-precision molding and grinding.

high efficiency

Centralized operation control; with FANUC 0iM controller, various actions can be input by program. It can also grind work objects of different shapes at the same time, starting from the placement of the workpiece, and even finishing the grinding wheel, rough grinding, and fine grinding at one time.

Multifunction

Multifunctional grinding of planes, grooves, pitches, steps, contours, indexing, etc. It can meet the needs of various workpieces, and the left and right sides can be used for slow feed grinding, which expands the grinding field.

Waterproof system

The closed waterproof cover and the powerful cooling system can effectively cool the high temperature generated by the workpiece, prevent scorching and deformation, and maintain the high precision of the workpiece.

Drive forward and backward

Both the front and rear axles of the lift are equipped with precision ball screws, which are driven by a servo motor, which can give full play to the characteristics of long life, precision maintenance, and low failure rate.

Stable and smooth table feed (FSG-H818CNC)

The worktable is driven by oil pressure and has two speed controls, which can be used for slow feed grinding and fast grinding, which can be suitable for various work requirements.

Stable and precise table feed (FSG-B818CNC)

The worktable adopts precision ball stalks and is driven by a servo motor, which can be used for precise positioning and slow feed grinding.

Holistic structure

The integral casting structure can withstand heavy cutting, and with the special slow feed function, it can carry out deep-cut slow-feed grinding. The same workpiece can also be quickly ground, which greatly improves the grinding efficiency.

Grinding function

• Split grinding

  With vertical or horizontal indexing plate and fixture, it can grind various equal shapes and cut grooves

•  

  Step grinding

  The plane of unequal height can be set for grinding wheel dressing at one tim

•  

  Side grind

  Both sides can set the grinding wheel dressing, correction and grinding at one time

•  

  Grind deeply and slowly

  Used in various shapes such as molding, grooves, and planes, which can improve work efficiency

•  

  Groove grinding

• The fine groove grinding can be deep-cut and slow-grinding, which has a very good effect when used for ceramic materials.

•  

  Groove grinding

  The fine groove grinding can be deep-cut and slow-grinding, which has a very good effect when used for ceramic materials.

Mechanical structure

Spindle (including heat sink)

The precision spindle is supported by six ultra-precision angular ball bearings, so that the spindle can withstand heavy load grinding. The spindle air pressure cooling system raises and lowers the temperature to *, so that the spindle maintains high precision. (Air compressor is a special accessory)

Drainage characteristics

The drainage groove of the upper base is specially designed with large capacity and large slope, which can hold a large amount of cutting fluid and discharge it quickly and cleanly without causing water accumulation.

Waterproof cover

The fully enclosed waterproof cover, due to its fully sealed form, has high safety and good waterproof effect. It can best perform its functions when doing strong cooling.

Operation box

There is a screen display on the control panel, which can display the coordinate position and program execution status, so that the operator knows whether the current processing status is correct. The control box can also be moved to a comfortable position to facilitate user operation.

Body shaped base

The special-shaped base adopts one-piece molding casting, which has high strength and excellent stability, which can increase the service life of the machine.

Lifting detection mechanism

The detector mechanism is located at the upper end of the lifting ball screw stalk, and can be directly detected with the clutch, which improves the lifting accuracy and reduces the error, and can increase the life.

Lifting track (818CNC)

The body and the main shaft base use hardened and finely ground sliding rails. Wear-resistant sliding plates (Turcite-B) are used between the sliding rails, which are the dissipating media. They have undergone precision scratching treatment, and then coordinated with precision ball screw stalk transmission. It can make the grinding wheel reach the positioning accurately when the fine-tuning feed is 0.001mm (0.00005").

Lubrication system (818CNC)

Equipped with an automatic lubricating oil tank, which routes the lubricating oil to each mechanism and track for forced lubrication, and is equipped with a safety switch. When the lubricating oil pressure does not reach the set pressure, the machine cannot be started, which improves the life of the machine And accuracy.

Left and right mechanism (B818CNC/C1224CNC)

The skateboard adopts double V track and Turcite-B wear-resistant glue, which has low resistance and long life. With precision ball screw stalk, it can be more accurate and stable. It is especially suitable for precise positioning and deep-cutting and slow feeding.

1. Spindle base lifting guide

2. Spindle base lifting ball screw

3. The front and rear rails of the lower base

4. Front and rear ball screws

5. Upper base rail

6. Left and right ball screws

7. Automatic lubricating oil tank

8. Flow adjustment valve

9. Oiler

Dongguan Gaotengda Precision Tools Co., Ltd.

[Agent CHEVALIER Taiwan Fuyu Precision Surface Grinding Machine CNC Grinding Machine]

FSG-12_16_20 series_new energy industry_lithium battery coating nozzle

FVGCseries_TC_20210518_V4 New Energy Industry
SMART-B818III_New Energy Industry_Ultrasonic Welding Head
Taiwan Fuyu CHevalIER CNC surface grinder, large water grinder
Vertical machining center, 5-axis machining center QP5X-400
Multifunctional CNC lathe, CNC lathe Taiwan Qiaojia JAGURA cylindrical grinder, centerless grinder
Japan RS-Japan Ultrasonic High Speed Spindle
Korea KTC fine hole electric discharge machine, punching machine
Italy DELTA vertical grinder LC-400, LC-500
Swiss DAMA Sharpener MM-12
Japan AMADA turning and milling compound processing machine
Japan Mitsui MITSUI surface grinder, grinder
Japan KIRA Kira machine tool KPC-30b, PCV-30
Japan Kondo circular grinding CKG series, ASZ series, UGK series, CTW series