Tubing Crossover X-Over Nipple Sub Pup Joint Pin x Box Box x Pin

Tubing crossover is a short pup joint with two different connections used to connect two tubings or tools with different sizes or connections.  

The oil tubing crossover is a component used in oil and gas well drilling, completion and production operations. 

Oil tubing is used to transport oil or gas from a wellbore to the surface, and it is usually made of steel. The tubing is threaded on both ends to allow it to be connected to other tubing sections or to other components in the wellbore, such as the production casing, the wellhead or tools.

Sometimes, the tubing sections have different thread types or sizes, which can make it difficult to connect them directly. This is where the oil tubing crossover comes in. The crossover has different thread types or sizes on each end, which allows it to connect two different sections of tubing together.

Oil tubing crossovers are manufactured to meet specific industry standards API Spec 5CT, API Spec 5B and must be made of high-quality materials to withstand the harsh conditions of oil and gas well drilling operations.

2-3/8‘’ EU Pin x 2-7/8'' EU Box N80 L80 

2-3/8‘’ EU Box x 2-7/8'' EU Pin N80 L80 

2-7/8‘’ EU Pin x 3-1/2'' EU Box  N80 L80

2-7/8‘’ EU Box x 3-1/2'' EU Pin N80 L80

3-1/2‘’ EU Pin x 4-1/2'' EU Box  N80 L80

3-1/2‘’ EU Box x 4-1/2'' EU Pin N80 L80

Grade: API 5CT J55, API 5CT K55, API 5CT N80, API 5CT L80, API 5CT P110

Length: As per requirements

Surface: Phosphating Treated

Packing in wooden cases