This oven is applicable to the baking of laboratory, chemical, pharmaceutical and various electronic products, epoxy resin crafts, electrical casting and baking of various magnetic accessories and metal materials, baking, drying, disinfection, heat treatment aging and other heating purposes within the specified temperature.

1、 Specification

Internal dimension: 800 (W) × 800(H) × 800(D)±1mm；

External dimension: subject to the real object;

The controller is located under the machine and the door opens from right to left;

The inner material is stainless steel perforated plate 304 #, 2mm thick, which will not deform in high temperature operation;.

The middle air duct is made of stainless steel plate 304 #: 2mm thick;

The external material is SECC steel plate with thickness ≥ 1.2mm powder baking paint treatment It is divided into three layers and equipped with three grid plates;

The thermal insulation material is 100Kg/m3 carborundum high-density glass wool, the thickness of the thermal insulation layer is 150 mm, and the thermal insulation is good, so as to ensure the thermal insulation to the maximum extent.

Fiber asbestos seal, not easy to aging;

With movable casters and fixed feet, it can be pushed and fixed at will;

No glass window;

2、 Temperature control system

The temperature control is a PID microcomputer program control instrument, which can be automatically calculated, PV/SV display at the same time, and set by keys, and can set multiple temperature and time values (Taisong instrument);

Temperature induction force CA (K) TYPE (Taiwan Shenjie);

The output is 12V;

The current controller is SSR contactless RELAY; (Solid state relay controls power output,),

The heating material is composed of ceramic plate and high-temperature heating wire;

Temperature range RT+50~500 ℃ (usually within 450 ℃);

3、 Accuracy

Control accuracy ± 1 ℃;

Temperature distribution uniformity in the box ± 2.5% ℃;

4、 Heating rate

RT － 100 ℃ for about 20 minutes

5、 Air supply system

Forced horizontal air supply circulation; The air source is driven by the circulating motor to drive the wind wheel through the electric heater, and the hot air is transferred from

The air is sent to the inside of the oven, and the hot air after use is sucked into the air duct to become the air source for re-circulating heating, so as to reduce the energy loss and ensure the temperature uniformity in the oven. When the door opening and closing actions cause disturbance, the air supply and circulation system can be used to quickly restore the operating temperature value, and the air inlet and outlet are opened,

The motor is a special type with long axis and high temperature resistance, with a horse rate of 1hp/50Hz (Taiwan Tonghe);

The fan is multi-blade turbine type;

An adjustable deflector is installed inside.