Product Description

This machine is a dedicated testing device for small consumer electronic products such as mobile phones, interphones, and electronic dictionaries. It is mainly used for durability tests such as drawing frames, clicking, and rubbing on hand writing screens and touch screens.

 

characteristic

Using motion trajectory testing and convenient coordinate point finding function, it is only necessary to take any two points on the test product (LCD) to draw a line, take any three points to generate a triangle, and take four points to generate square or rectangular motion trajectories. The motion trajectory can be accessed according to the test product specifications for next invocation. Moreover, it uses a stepper motor with a linear guide rail and ball screw as a motion mechanism, featuring accurate positioning, high accuracy, low noise, precision, and durability.

 

Specifications

1. Test station: two stations (X+Y)

 

2. Y-axis movement range: 100mm

 

3. X-axis movement range: 150mm

 

4. Drive mode: electric drive mode

 

5. Click on the cylinder stroke: 0-15mm

 

6. Positioning accuracy: 0.05mm

 

7. Movement speed: 30-450mm/min

 

8. Click speed: 0-250 times/min

 

9. Pressure range: 0-800gf

 

10. Load: 50g, 100g, 200g, 300g

 

11. Click: finger/stylus

 

12. Scribing: Finger/stylus

 

13. Control function:

 

A. Digitally set operating speed (X/Y/Z axis)

 

B. Digitally set running displacement (X/Y axis)

 

C. The counting value is displayed on an 8-bit LCD, and can be arbitrarily set from 1 to 99999999. The counting stops

 

D. Line drawing method: long (square), straight line, triangle

 

14. Alarm function: counting values to alarm and shutdown

 

15. Power supply: AC 220V 50HZ