Introduction to the device
The device welds 166mmx1/2 IBC solar cells, enabling multiple forms of IBC cell welding. Meet the IBC cell (1/2) chamfer forward and backward welding, and meet the chamfer front and rear welding at the same time. infrared heating, segmented welding; Closed-loop control of welding temperature and power, gentle temperature climb, small thermal shock, effectively reducing the fragmentation rate of the battery. Maximum capacity: ≤1000 PCS/H (with paper reclaim).

Product advantages
Motor drive rail cell positioning
High-speed electric cylinder battery sheet classification, handling and positioning
Original flexible pressure holding welding strip mechanism
Motor drive rail cell positioning
High-speed electric cylinder battery sheet classification, handling and positioning
Original flexible pressure holding welding strip mechanism
Electrocution welding
High compatibility: the equipment welds 166mmx1/21 BC solar cells, which can realize the welding of IBC cells in various forms;
Multi-form welding: meet the forward and backward welding of the chamfer of IBC cells (1/2), and weld at the same time before and after meeting the chamfer.
Effectively reduce the fragmentation rate: infrared heating, segmented welding; Closed-loop control of welding temperature and power, gentle temperature climb, small thermal shock, effectively reducing the fragmentation rate of the battery

Device parameters
Maximum capacity: ≤1000 half sheets/hour (with paper pick-up mechanism)
Cell size: 166mm (1/2 dicing welding) (support non-standard customization)
Cell thickness: 0.16-0.3mm
Number of grid lines: thickness 0.2mm, width 1.0mm (6BB) / thickness 0.18mm, width 0.5mm (9BB)
Cell spacing: 0.7-5mm adjustable
Battery string spacing: 10-40mm
Maximum stringer length: up to 12 pieces, half piece up to 24 pieces, up to 2000mm
Welding strip, grid line coincidence deviation: ≤±0.1mm
Fragmentation rate: ≤0.2% (positive grade A)
Welding method: non-contact infrared lamp welding
Battery string conveying mode: Teflon conveyor belt, servo motor driven
Flux coating form: immersion
Types of cell visual defect detection: edge crack / corner crack / crack / silk screen offset material / cell flip / surface dirt
Discharging form: manual discharging or automatic docking typesetting machine
Electrical system :P LC plus servo system
Man-machine interface: integrated touch screen industrial computer, cantilever operation box
Input voltage and power: AC380V (3 phases 5 wires), 50-60Hz, 5.5kW operation, preheating 8kw
Input air pressure, air consumption: 0.6-0.8MPa, average 450 standard liters / min, peak 800 standard liters / minute
Size: 6000x1350x2110mm, door width 2463mm, cantilever operation box maximum rotation width and length 2948mmx6316mm;
Net weight: 2200kg