Profile
The CT-ZX-200 series online border marking machine is suitable for fully automatic marking for the battery component nameplate and QR code of the solar energy industry. The device uses a multi -vibration mirror partition scanning method, which greatly improves the efficiency of work; and can automatically enter and exit components to directly connect the production line, which is flexible; the structure is simple, and its own vacuum effect is very convenient to clean and maintain. Equipment auction ≤16 seconds efficient marks, ranking among the top China.

Features
1. Fully automatically enter and exit components, you can directly connect to the production line to arrange flexible arrangements;
2. Docking the MES system of the production line, automatically press the setting of the settings;
3. CCD visual positioning, automatically detect the marking effect;
4. The range of the graphic can be customized, and the size can be adjusted;
5. Comes with 5 laser marks, efficient and fast;
6. Equipment auction ≤16 seconds, the world's leading level;
7, self -cleansing effect, cleaning and maintenance.

Device parameters:
Lidar length: 1064nm
Maximum output power: 100WX5
Repeated frequency: 1kHz ~ 2000kHz
Cooling method: forced wind cold
QR code marking surface: 70mmx70mm
Nameplate marker surface: 220mmx220mm
Specify the marking accuracy: x: ± 2mm; y: ± 0.5mm; angle: ± 0.5 °
Positioning method: cylinder/servo mechanical positioning
Equipment beat: ≤16 seconds
Transmission line height: 950 ± 20mm
Component flow outflow method: A: grow and grow;
Component version size range: length: 1600-2550mm; width: 900-1400mm; height: 20-50m
Switch version requirements: ≤120 minutes; 2 manpower
Use gas source: pressure ≥0.7MPa; traffic ≥100L/min
Use power supply: Single -phase three -line (220V 50Hz) capacity 2.5kW
Equipment size: long x width x height = 3000x2600x2500mm
Equipment weight: 1.8 tons