AC 110V and 208-240V (50/60Hz) switchable for worldwide operation.

• One cast iron plate for lapping and one cast aluminum plate for polishing
• Flatness < 2.5 micron / inch²

• Automatic slurry feeder SKZD-2 is not included
• The plastic rolling container can take the volume of slurry up to 1.0 Gallon (~3.8L) for a long time polishing
• Please click the left picture to order the feeder
•     

• 2" Polishing Fixture for Precision / Automatic Thinning and Polishing (Pic.2)
• Polishing Sample Holder with Three 1" Holes for high throughput polishing  (2 x 3 sample)  (Pic.3)
• 8'' high purity ceramic lapping plate
• Alumina lapping stage, sample holder, and conditioning ring are available upon request. (Pic.4)
• Pic.1   Pic.2   Pic.3    Pic.4

• One-year limited warranty with lifetime support
• Rusting and damage due to improper storage condition or maintenance are not covered by warranty

• CE Certified
• NRTL certification is available at an extra cost of $3500.00

• AC 208-240V (50/60Hz)
• (110V version is available with a 750W transformer at an extra cost）
• 24VDC motor is optional to operate in Ar gas glovebox at the extra cost

• Two 12" diameter flat lapping plates are included with flatness< 0.25 micron/Inch²
  • One is made of cast iron with growing for lapping
  • One is made of Auluminiu for holding polishing pads
• Two rocking workstations with wafer holders and condition rings, which can be controlled independently for polishing 2 pcs of 4" wafers at the same time
• Complete accessories are included for immediate use

• The multi-sample polishing fixture is available up to 2 x 8 pcs for 1" dia. samples per batch (Pic. 1)
• 4" Polishing Fixture for Precision / Automatic Thinning and Polishing (Pic. 2 & 3)
• Pic. 1   Pic. 2          Pic. 3

• CE Certified

• One year limited with lifetime support
• Rusting and damage due to improper storage condition or maintenance are not covered by warranty

AC 110V and 208-240V (50/60Hz) are switchable for worldwide operation.

• One is made of cast iron with growing for lapping
• One is made of Auluminiu for holding polishing pads

• Three workstations with 4" sample per running
• One workstation with 6" sample per running (high-quality polishing)
• One workstation with 8" sample per running (decent quality polishing)

720mm L x 580mm W x 380mm H

• Consumables for polishing/lapping/grinding. Click Pic. 1  to see more details
• The multi-sample polishing fixture is available up to 3 x 8  pcs for 1" dia. samples per batch (Pic. 1)
• 4" Polishing Fixture With Pressure Indicator for Precision / Automatic Thinning and Polishing- EQ-PF-4-1P is available for ultra-flat surface lapping and polishing (Pic. 3 &4)
• Precision Thickness Checker with 0.001 mm Dial/Digital Indicator available at an extra cost (Click Pic.5)

Pic. 2

• CE Certified
• NRTL certification is available at the extra cost

• Automatic slurry feeder SKZD-2 is not included
• The plastic rolling container can take the volume of slurry up to 1.0 Gallon (~3.8L) for a long time polishing
• Please click the left picture to order.

              

• One year limited warranty with lifetime support
• Rusting and damage due to improper storage condition or maintenance are not covered by warranty

• 48" x 40" x 35" (L x W x H)

• 420 lbs

• Unipol-1502 allows a sample size up to 8" with a different number of workstations involved. A total of 3 yokes are equipped.

AC 110V and 208-240V (50/60Hz) switchable for worldwide operation
( Voltage sawitch is in the back of the machine)

• Heavy-duty cast aluminum case with the painting surface
• Belt drive with high torque and quiet operation
• 8" dia Super flat lapping plate
• Condition ring with one 75 mm dia flat sample holder for lapping polishing flat component
• 3" dia. flat sample holder for polishing flat sample
• 75 mm dia. sample holder with three holes to allow polishing three metallographic samples up to 1" dia. at one time, which is available as optional
• Yoke without swing to allow polishing automatically

• Two 8" PSA Diamond Lapping plates with 320 mesh and 600 mesh separately for fast lapping/grinding
• Two 8" PSA polishing pads for final polishing
• 10g 0.5 micron diamond paste for faster polishing

• 3" Sample Holder with 3 Holes 1" diameter round mount and two weights
• 2" Polishing Fixture for Precision / Automatic Thinning and Polishing is available (click pic left-2 to order)
• Accessory equipment (slurry feeder, carrier/chuck, thickness meter, weights, etc) Click to enter
• Consumables for polishing/lapping/grinding (sandpaper, pad, plate, slurry, molding, coolant, etc). Click to enter

             

• CE Certified only

• One year limited with lifetime support
• Rusting and damage due to improper storage condition or maintenance are not covered by warranty

DC 24V
An AC 110 - 240V to DC 24V power adapter is included.

• Digital control panel with "touch button" operation
• Water resistance
• 12" Aluminum master plate with a magnetic pad and steel buffer sheet for an easy diamond plate and sandpaper replacement

• Hose I.D for the water outlet: 25mm
• Hose I.D for the water inlet: 15mm

• One 12" diameter aluminum metal plate was pre-installed with a magnetic pad. (EQ-MagnetP12)
• Five steel buffer sheets (Zinc coated) for carrying sandpaper and polishing pad, which can be attached to the magnetic plate stable and easy detachment
• Two 12" PSA Diamond Lapping plates with 600 mesh and 800 mesh separately
• One 12" PSA black polishing pads for final polishing
• One 10g diamond paste for testing polishing.
• Optional: Please click the link below to order diamond polishing paste or sandpaper
•                  

• CE Certified
• NRTL certification is available at the extra cost

• One year limited with lifetime support
• Rusting and damage due to improper storage condition or maintenance are not covered by warranty