Product Description

Product Description

Good quality stepper motor with gearbox valve Best-Selling

 

 

Manufacturers of Permanent magnet(PM) Stepper Motor & PM Synchronous Motor:

 

 

1. PM Stepper Motor:

 

Diameter	8mm	10mm	15mm	20mm	25mm	35mm	42mm	55mm
Model No.	PM8S-020	PM10S-020	PM15S-020	PM20S(L)-020	PM25S(L)-048(024)	PM35S(L)-048(024)	PM42S(L)-048	PM55L-048

 

 

2. PM Stepper Motor with gearbox(with different gear ratio):

 

Diameter	10mm	15mm	20mm	24mm	25mm	28mm	35mm	42mm
Model No.	PG10S-020	PG15S-020	20BYJ46	24BYJ48	PG25S-048	28BYJ48	35BYJ46; PG35L-048	PG42L-048

 

 

3. PM Linear stepper motor(with lead screw):

 

Diameter	8mm	10mm	25mm
Model No.	PL8S-020	PL10S-020	PL25S-048(024)

 

 

 

Application :

HVAC/R    Valve Actuation

Office Automation    Printers, Copiers, Data storage

Medical Applications    Pill dispensing    Analysers

Telecommunication    Antennae positioning    Switching lines

Other Industries & Applications     Robotics

 

Highlights :

Excellent open loop control - No encoders necessary

Digitally controlled - Easy to use with a micro processor

Cost effective - compact design, lower integration cost

Maintenance free - motor is brushless

Winding possibilities - Bipolar

 

General Specification:

 

Item	Specification
Step Angle Accuracy	±8%(full step, no load)
Resistance Tolerance	±10%
Inductance Tolerance	±20%
Temperature Rise	80.C Max.(rated current,2 phase on)
Ambient Temperature	-20.C~+50.C
Insulation Resistance	100MΩMin. ,500VDC
Dielectric Strength	600VAC , 1s , 3mA

 

Specification:

 

Model	Step Angle (Deg.)	No. of Phase	Rated Voltage (VDC)	Current/Phase(A)	Resistance /Phase(Ω)	Holding Torque (Kgf.cm)	Detent Torque (gf.cm)	Pull-in Torque  (gf.cm)	Wire Diagram
PG35L-048-01/8.4	7.5/8.4	4	12	0.4	30	1.2	500	700(at 100pps)	B
PG35L-048-01/19	7.5/19	4	12	0.4	30	10.0	2600	3500(at 100pps)	B
PG35L-048-01/19	7.5/19	4	24	0.218	110	12.0	2280	5000(at 100pps)	B
PG35L-048-01/30	7.5/30	4	12	0.4	30	3.0	1500	1500(at 100pps)	B
PG35L-048-01/60	7.5/60	4	12	0.4	30	8.0	3000	4500(at 100pps)	B
PG35L-048-01/120	7.5/120	4	12	0.4	30	10.0	6000	5000(at 100pps)	B

 

 

All parameter and dimensions could be customized according to your actual application. If you need any more information, please do not hesitate to contact me.

 

 

Dimension

 

 

 

 

Customization On Call

Coil Modifications - Resistance and Inductance.
Magnets - to yield higher linear force or reduced detent levels.
Higher Strength Plastics for higher impact forces.
Reduced or increased Detent Force to suit the application.
Screw - metric or imperial tips, length.
Special Flanges, Connectors, End of motion detection sensors.
Wire Harness - connectors, pins, lead length, shrink tubing.

 

Examples of our customers: