PM42L-048 pm stepper motor

 

1. Motor diameter: 42mm, 35mm, 25mm, 20mm, 15mm, 10mm, 8mm;

2. Voltage: 12V, 24V(All could be customized);

3. Step Angle: 7.5 degree, 15 degree;

4. No. of Phase: 2 Phase(Bipolar 4 Wires); 4 Phase(Uni-polar 6 Wires)

5. Motor can be customized;

6. ISO9001-2015 Certified; RoHs meeted.

 

 

Manufacturers of Permanent magnet(PM) Stepper Motor & PM Synchronous Motor:

 

 

 

1. PM Series:

Diameter	8mm	10mm	15mm	20mm	25mm	35mm	42mm	55mm
Model No.	PM8S-020	PM10S-020	PM15S-020	PM20S(L)-020	PM25S(L)-048(024)	PM35S(L)-048(024)	PM42S(L)-048	PM55L-048

 

 

 

 

 

2. PG Series: PM Stepper Motor with gearbox(with different gear ratio) & BYJ Series

Diameter	10mm	15mm	20mm	24mm	25mm	28mm	35mm	42mm
Model No.	PG10S-020	PG15S-020	20BYJ46	24BYJ48	PG25S-048	28BYJ48	35BYJ46; PG35L-048	PG42L-048

 

 

3. PL Series: PM Linear stepper motor(with lead screw):

 

Diameter	8mm	10mm	25mm
Model No.	PL8S-020	PL10S-020	PL25S-048(024)

 

 

 

Application :

HVAC/R Valve Actuation

Office Automation Printers, Copiers, Data storage

Medical Applications Pill dispensing Analysers

Telecommunication Antennae positioning Switching lines

Other Industries & Applications Robotics

 

Highlights :

Excellent open loop control - No encoders necessary

Digitally controlled - Easy to use with a micro processor

Cost effective - compact design, lower integration cost

Maintenance free - motor is brushless

Winding possibilities – Bipolar

 

General Specification:

 

Item	Specification
Step Angle Accuracy	±8%(full   step, no load)
Resistance Tolerance	±10%
Inductance Tolerance	±20%
Temperature Rise	80.C Max.(rated current,2   phase on)
Ambient Temperature	-20.C~+50.C
Insulation   Resistance	100MΩMin.   ,500VDC
Dielectric Strength	600VAC   , 1s , 3mA

 

 

Specification:

 

Model	Step Angle (Deg.)	No. of     Phase	Rated   Voltage (VDC)	Resistance     /Phase(Ω)	Max Pull-in Rate(PPS)	Holding Torque (gf.cm)	Figure
PM42S-048-01	7.5	4	24	45	500	600	1
PM42S-048-02	7.5	2	24	11.3	500	600	1
PM42L-048-01	7.5	4	24	80	300	650	2
PM42L-048-02	7.5	2	24	9.1	500	500	3

 

 

Dimension:

 

Fig 1

 

Fig 2

 

Fig 3

 

 

Wire Diagram

  

 

 

Customization On Call

Coil Modifications - Resistance and Inductance.

Magnets - to yield higher linear force or reduced detent levels.

Higher Strength Plastics for higher impact forces.

Reduced or increased Detent Force to suit the application.

Screw - metric or imperial tips, length.

Special Flanges, Connectors, End of motion detection sensors.

Wire Harness - connectors, pins, lead length, shrink tubing. 

 

Examples of our main cooperative customers: