Double-sided flying probe tester

The TAKAYA APT-1600FD series is a double-sided flying probe tester that can simultaneously test the front and back of a circuit board using a combination of four upper pins and two lower pins.

Since it can handle component heights up to 60 mm and board weights up to 10 kg, it is suitable for testing large and heavy substrates such as automotive, aircraft and medical equipment, as well as power supply boards and probe cards.

Specification

Number of probes 4 top / 2 bottom

Up to 350,000 inspection steps

Measurement speed 0.02 sec/step

Minimum contact pad size 60 microns

Repeatability of probe positioning ±25µ~

Minimum probe pitch 0.15 mm

Measurable size L540 x D483mm/W635 x D610 mm

Expandable to 890x483mm/W985 × D610 mm, optional

Power supply/air supply: AC200~240V (single phase)

50/60Hz, max. 2.8kVA Air

: 0.6~0.8Mpa (dry air)

Size and weight W1400×D1500×H1400mm

1400kg

Measuring range

DC voltage/current ± 125V/±1A (optional: up to ±2A)

AC Voltage 150mV ~ 75Vrms, f = 10Hz ~ 0.5MHz

Frequency 1Hz ~ 20MHz / 2V ~ 20Vp-p

Resistance 5mΩ ~ 50MΩ *Customized 2mΩ~

Capacitance 0.5pF ~ 200mF

Inductance 0.5μH ~ 500H

Impedance/Phase Angle 2.5Ω ~ 3.3MΩ / ±90°

Trance Inductance, Winding Ratio, Phase Difference

PN Junction VF Measurement 0.1V ~ 40V

Zener Diode Voltage 0.1V ~ 40V (Optional: up to 80V)

Open check can set threshold 5 Ω ~ 50MΩ (standard 100 Ω or more)

Short check can set threshold 1 Ω ~ 500KΩ (standard 10Ω or less)

Diode/Transistor/Field Effect Tube PN Junction VF Measurement, ON Test, Gain, Characterization

Relay/Opto-coupler/Switching element ON test