Input Voltage |
90 ~ 264Vac 127 ~ 370Vdc |
Input Frequecny |
47 ~ 63Hz |
Input Current |
12A/115Vac 6A/230Vac |
Inrush Current |
25A/115Vac 40A/230Vac |
Leakage Current |
<2.0mA at 240Vac |
Power Factor |
0.95/230Vac 0.98/115Vac at full load |
Set Up, Rise Time |
300ms, 50ms at full load |
Hold Tme |
16ms/230Vac 16ms/115Vac, at full load |
Over Load Protection |
105 ~ 125% rated output power |
|
Constant current limiting, recovers automatically after fault condition is removed |
Over Voltage Protection |
Shut down o/p voltage, re-power on to recover |
Over Temperature Protection |
85°C ±5°C (TSW2 ) Detect on heatsink of O/P diode; |
|
75°C ±5°C (TSW1 ) Detect on heatsink of power transistor |
|
Shut down o/p voltage, recovers automatically after temperature goes down |
Auxiliary Power (AUX) |
5V @ 0.5A (+5%, -8%) |
Remote ON/OFF Control |
Power on : short between on/off(pin6) & -S(pin2) on CN50 |
|
Power off : open between on/off(pin6) & -S(pin2) on CN50 |
DC OK Signal |
Open collector signal low when PSU turns on, Max. sink current :10mA |
Output Voltage Trim |
40 ~ 110% of rated output |
Current Sharing |
Refer to function manual |
Working Temperature |
-20°C to +60°C (Refer to output load derating curve) |
Working Humidity |
20 ~ 90% RH non-condensing |
Storage Temperature, Humidity |
-40°C to +85°C, 10 ~ 95% RH |
Temperature Coefficient |
±0.02%/°C (0 ~ 50°C) |
Vibration |
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes |
Withstand Voltage |
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC |
Safety Standards |
UL60950-1, TUV EN60950-1 Approved |
EMC |
Compliance to EN55022 (CISPR22); EN61000-3-2,-3; ENV50204; |
|
EN61000-4-2,3,4,5,6,8,11; EN55024; EN61000-6-2; EN61204-3 Heavy Industry Level, Criteria A |
MTBF |
35K hrs min. MIL-HDBK-217F (25°C) |