DET-60W product specification:

1.   Power factor: λ≥0.97

2.   With proof burning plastic shell, safer than ferreous shell.

3.   Inside temperature fuse, high safety.

4.   According to IEC61347-2-2

5.   Suitable for ordinary phase dimmer switch.

6.   With small size and can be worked with many lamps.

 Installation Instruction:

1.  Turn OFF the supply power.

2.   Connect one input wire direct to main wire N, connect the dimmer switch in series with one input wire to main wire L. (as show).connect output wires to halogen lamp.

3.   Fix the DET-60W into a stable place

4.   Turn ON the supply power.

Attention:

1. Electrical connection should be done by a qualified electrical personnel.

2.The distance between DET-60W and halogen lamp should be more than 0.2M(200mm)

3.When two or more DET-60W are installed in the circuit, the distance between each DET-60W should be more than 0.25M(250mm)

4.This DET-60W is suitable for ordinary phase dimmer switch.

5.Use for indoor application only.