2000 is a managed Ethernet Media Converter System. It provides an ideal solution to extend the Ethernet services over fiber for fiber-to-the-home (FTTH) or fiber-to-the-building (FTTB) applications. The OnAccess2000 offers up to 15 media converter slots to accommodate all kind of different media converter type, such as 10/100Base-TX to 100Base-FX or 10/100/1000Base-TX to 1000Base-X media converter. OnAccess2000 network management solution allows administrators to easily configure features, monitor performance, and troubleshoot the system using a standard Web browser and Simple Network Management Protocol (SNMP)-based network management platforms.
Network Application |
Features
- Up to 15 media converter slots in one chassis.
- In-band network management communication with TS-1000 standard.
- Up to 4Chassis stackable in management by RS232 cable link.
- 10/100Base-TX to 100Base-FX media conversion.
- 10/100/1000Base-TX to 1000Base-X media conversion
- Single fiber to dual fibers conversion
- Multi-mode fiber to single mode fiber conversion
- Non-blocking store-and-forward architecture enables the forwarding rate to proceed at a full wire speed .
- 802.1p Class of Service with 2-level priority .
- 802.3x flow control for a full-duplex mode and collision-based backpressure for a half-duplex mode .
- 802.1Q tag-based VLAN with 12 bit VID.
- Egress/Ingress rate management control with 2-level priority.
- Remote loop back capability.
- Remote power off sensitive.
- Converter card exchangeable between chassis and remote unit.
Network Management
- In Band: SNMP, Web-based HTTP and Telnet.
- Out of Band: RS-232 Console.
Network Protocol and Standards
- IEEE: 802.3, 802.3u, 802.3z, 802.3ab, 802.3ah, 802.1p, 802.1q, 802.1v, 802.3ad, 802.3x
- IEFT: RFC1157 SNMP, RFC854 Telnet, RFC 1123/1493/1643 MIB
Port Configuration
- 10/100Base-TX RJ45 port and 100Base-FX SC port with single or dual fiber options.
- 10/100/1000Base-TX RJ45 port and 1000Base-X SC or LC port with single or dual fiber options.
- 100Base-FX and 1000Base-X port with single and multi-mode fiber options.
Optical Interface Options
- 100Base-FX:
² Single single-mode fiber, dual wavelength 1310 / 1550nm, SC connector, operating distance 15 / 25 / 40 / 60km
² Dual single-mode fibers, single wavelength 1310 or 1550nm, SC connector, operating distance 15 / 25 / 40 / 60km
² Dual multi-mode fibers, single wavelength 1310nm, SC connector, operating distance 2km
- 1000Base-X:
² Dual multimode fiber (50/125 μ m), single wavelength 850nm, dual SC or LC connectors, operating distance 550m
² Dual multimode fiber (62.5/125 μ m), single wavelength 850nm, dual SC or LC connectors, operating distance 275m
² Dual single-mode fiber, single wavelength 1310nm or 1550nm, dual SC or LC connectors, operating distance 15/40km
² Single single-mode fiber, dual wavelength 1310 / 1550nm, SC or LC connector, operating distance 15 / 25 / 40
Power Supply Options
- AC90~264V/1.2A max, 50/60Hz, or
- DC36~72V/1.5A.
- Power Consumption: ~35W
Physical and Environmental
- Dimensions: 19-inch rack-mount width, 2.0U height.
- Weight: 9Kg
- Operating temperature: 0 ℃ ~ 50 ℃
- Storage temperature: -25 ℃ ~ 55 ℃
- Humidity: 5% ~ 95% RH Non-condensing.
|