Fibridge video transmitter/ data transceiver and video receiver/data transceiver series utilizes state-of-the-art digital encoding and decoding for high-quality video transmission that exceeds the requirements of EIA RS-250C for Medium-Haul Video Transmission. These environmentally hardened units provide transmission of sixteen independent video channels, eight bi-directional audio channels, eight bi-directional data channels, four E1 channels and one 100M Ethernet over one single-mode or multimode optical fiber and are ideal for use in unconditioned roadside or out-of-plant installations. The product is widely used in the field of CCTV, video surveillance, national defense, ITS and etc.

2.Management
Support Console, WEB and SNMP format management
Monitor the module information including: Model, Version, Product description, Slot index, Device base information, Local Video Control, Local and Remote Video transmitting Status, Ethernet Status.
Support 1/2/4/8 channels Video plus E1, Ethernet, Audio, Data, concentrative management.
View the detailed information of power supply
Support real-time alarm and one history alarm message window

3.Specification

Power:
85-265VAC, 50/60Hz, standalone device
0.2A12VDC, rack card
Indicators:
Power, SYNC, Video, data

Video:
Channel: 16
Format: PAL/NTSC/SECAM
Video Signal: 1Vp-p, 75
Digitization: 8bit
Bandwidth: 8MHz
DG: <1%
DP: <1o
SNR: >65dB
Connectors: BNC

Audio:
Channel:4~8, Bi-dir
Audio Input: unbalanced, 600Ohms
Digitization: 16bit48k
Frequency: 10Hz to 20KHz
SNR:>70dB
Connector:RJ45

Data:
Channel: 8
Data Rate: 0~250Kbps
Data mode: 2-wire RS485
Connector: Terminal Block with Screw Clamps

Ethernet:
Data Rate: 10/100Mbps auto detect
Standard: IEEE802.3
Connector: RJ45
Auto-negotiation with half/full duplex

E1
Channel: 4
Rate:2.048Mbps 50ppm
Connector: BNC (75ohm