Fibridge FBVAD1000-Standard video transmitter/Audio/data transceiver and video receiver/Audio/data transceiver series utilizes state-of-the-art 8/10bit digital encoding and decoding for high-quality video transmission that exceeds the requirements of EIA RS-250C for Medium-Haul Video Transmission. These environmentally hardened units provide transmission of one independent video channel, one stereo audio channel, one bi-directional data channel and one Contact Closures channel over one single-mode or multimode optical fiber and are ideal for use in unconditioned roadside or out-of-plant installations. The product is widely used in the field of CCTV, video surveillance, national defense, ITS and etc.

2.Management
Support Console, WEB and SNMP format management
Monitor the module information including: Model, Version, Product description, Slot index, Device base information, Local Video Control, Local and Remote Video transmitting Status, Ethernet Status.
Support 1/2/4/8 channels Video plus E1, Ethernet, Audio, Data, concentrative management.

View the detailed information of power supply
Support real-time alarm and one history alarm message window

3Specification
3.1Power:
0.5A12VDC
Indicators:
Power, Run, Video Signal, data

3.2Video:
Channel: 1-8Bi-dir Channel
Format: PAL/NTSC/SECAM
Video Signal:1Vp-p, 75
Digitization: 8/10bits
Bandwidth: 8MHz
DG: <1%
DP:<1o
SNR:>65dB
Connectors: BNC


3.3Audio
Channel: 1-8 stereo audio
Line Impedance: unbalanced, 600Ohms
Digitization: 16bit48k
Bandwidth: 10Hz ~20KHz
SNR:>80dB
Connector: RJ-45

3.4Data:
Channel: 1-8, Bi-dir
Data Rate: 0~250Kbps
Selectable RS232/RS422/RS485
Connector: RJ-45

3.5Contact Closures:
Input/Output Channels: 1-4Bi-dir
Contacts: 220VAC, 1.0amp, 220watts.
Type: Normally open.
Response Time: 0.5 msec maximum
Connector: Terminal plug with screw clamps