The Trans-Audio Matrix 500 loudspeaker enclosures provide a versatile system that is designed for high performance fixed installation and touring.
The Matrix 500 is a active two-way loudspeaker . The low/mid section comprises a 15 inch water proof bass driver with 4” ventilated voice-coils, loaded by a 60Ox 40O Special horn, excellent directivity control down to 500 Hz is critical. The hi section includes a 1 inch HF compression driver mounted on a 60o x 40o constant directivity HF horn. The low section and HF section using collinear technology.
Frequency range (-6dB) 60 Hz to 20 kHz
Sensitivity ( f>80Hz) LF: 101dB, HF: 110dB @2.83V/1m
Maximum SPL LF: 128dB, HF: 129dB
Peak SPL LF: 133dB, HF: 137dB
Nominal directivity ( -6dB) 60horizontal, 40vertical
Nominal impedance LF/8 Ohm, HF/16 Ohm
Transducers 15" (380mm) bass driver
1" (25.4mm) compression driver
Rated Power(AES) LF500W, HF80W
Rated Power(PEAK) LF1500W, HF450W
Cabinetor: 18mm plywood with internal reinforcements
Crossover: The crossover point between low and high frequency components
Shall be 1.5 kHz with 24 dB per octave Linkwitz-Riley characteristics
Finish: BLACK
Protection grill, Acoustically transparent perforated steel, 1.5mm thick
Connectors: 2 x Neutrik SPEAKON NL4MP
Handles 2 integrated handles on side
Mounting on stand Put it on ground
Rigging: 6 standard points
Dimensions (H*W*D) 548*584*548 mm
1. Sensitivity is the average SPL measured over the component s rated bandwidth
2. Power rating displays the long term AES power handling capacity using pink noise with a 6 dB crest factor over the component. S rated bandwidth
3. Directivity is averaged over the 1000Hz-12 kHz range.
4. The SPEAKON cables are wired, hot pin 1+, cold pin 1-.