A200CM-XX Series 12V/24V/36V/48V Lead-Acid Battery Charger

• •  

  • Specification
    INPUT: AC 100 or 240V(defined when order)
    Suit for: 12V/24V/36V/48V Lead-Acid Battery(VRLA, AGM, GEL)
    Charge Process: CC-CV(H)-CV(L)
    LED Indicator: Red Charging/Green Finished
    Safety Approval: CE
    size: 210 x 93 x 53mm(Aluminum)
    Note: These models have no MOQ limitation

Charger of Series A200CM-XX

1. The charger integrates power factor correction (PFC), it can avoid the impact of high current and can't produce pollution on the grid
2. The input AC voltage is 90V~264V 50~60Hz for A200-XX, and is 90V~132V or 200V~260V 50~60Hz for A200CM-XX
3. Efficiency > 87%, Power Factor > 0.97 [for A200] or >0.7[for A200CM]
4. With MCU controller, CC+CV(H)+CV(L) 3-stages charge method
5. Designed for 12V~48V Pb-Acid battery

Protection
1. The charger's internal relay makes the output voltage is less than 5.5V with no-load, when the output is connected to a battery, the output voltage of charger is normal
2. Short circuit protection: When the output of charger is shorted, the charger will close output automatically without any damage
3. Reverse polarity protection: When the output is connected to a battery reversely, the charger will close output automatically without any damage
4. Overheating protection: The internal temperature exceeds 80° C, the charger will close output automatically
  If you have specific parameters and requirements for our High Power Lead-Acid Battery Charger,  customization is available