KB800 nurse call system is mainly applied to nursing homes and small size hospitals. The system is multi-data Bus cabled. It employs N+2 wire patteren. It has only calling function and can not be used for two-way communication. It can be connected with corridor alarm lamps and corridor display panels and can be controlled by computer

Features

• Prompt response, stable function, and low cost.
• A master machine can drive 128 modules user machines at the most.
• The LED can display five-digit numbers ( three for room number and two for bed number).
• The calling numbers, including room numbers and bed numbers, can be designed according to your habit.
• A master machine can be connected with several corridor display panels, which display the calling information simutaneously with the master machine.
• The master machine and corridor display panels display the present time when there is no call being made.
• Both pull and press is possible at the user machine. Alarming function through sound and light.
• There are reset buttons both in the master machine and in the corridor.
• Managed by computer. All calling information can be recorded for later referrence.
• Several central station can be managed by one computer.
• The system can be connected with wireless paging system and MS transceiver.

Master Machine Introduction

KB800

• With card slot ( plexiglass like material), in which information of respective patients can be put.
• Below the slot there is calling indicator lamp.
• Standard number of card slot: 60, the numbers can be extended up to 96
• Size: 375×745×750(L×W×H)mm

KB800S

• Use 5 inches high light digital tube, simple to operate
• Standard numbers of module: 80, can be extended up to 128

KB800D

• Use desktop type master machine, can be put on desk.
• Standard numbers of module: 32 and can be customrized up to 48.
• Size:197×91×299(L×W×H)mm

Components Description

User machine

• Use Omron Electrical switch, functions properly after 10 thousand times of press or push
• It can be pressed or pulled. It alarms through light and sound. The panel of user machine will be lighted and alarming sound will be given.
• Can be fixed with the 86 style electrical box; can be installed onto the wall or be directly installed to the bed head unit.

Corridor display panel

• Stainless cover.
• Use 4 inches high light digital tube, long duration.
• It has two patterns: single-side and double-sides.
• Designed with a reset button.
• Size: 653×270×70(L×W×H)mm

Alarming door lamp

• Special door lamp cover is made of transparent ABS material, exquisite and beautiful.
• Circuit panel installed inside.
• Installed together with standard 86 style electrical box.

Management software

• A signal collector is needed to maintain signal-collection of the system.
• Receive the signal from mater machine by serial port.
• Exactly record the room number, bed number and time of reset when a call occurs.
• Enquiry, Stat., print is possible

Wiring Method

• N+2 cabling, One user machine needs three wires: signal wire, power wire and ground wire. User machines share the same power wire and ground wire.
• RJ45 network cable can be used for cabling. One cable can connect 6 user machines

Technical Parameter

• The Maximum Module of master machine: 128
• master machine Power Supply: transformer, 220VAC External power supply
• user machine Voltage:5V, powered by master machine
• Corridor Display Panel Voltage: 15V DC, can be powered by external DC transformer or can be powered by mater machine
• Cable: RJ45 net line.
• The Maximum Communicate Bus distance of user machine: 500meters
• Work method: continuous working
• Power Consumption: <30W (when no call is made)
• Work Condition: temperature -10 C°cT< 40C°, humidity: ≤990%