EB4060A/B is an EA based two-component polyurethane adhesive with excellent anti-auxiliaries performance, widely used in laminating of various treated film like PET, NY, CPP, PE, etc.

1. Typical Features:
Specialized to laminate the film which the contents required to be steamed at 121° C less than 30 minutes, EB4060A/B is especially used to produce the packaging film with structural plastic/plastic...
High initial and final bonding strength, Good peeling strength of the laminated film
The film laminated by EB4060A/B have a good anti-medium and anti-corrosive effect.
Especially suitable to laminate the PE film with high content of auxiliaries.
Comply with US FDA 21CFR177.1395.

2. Recommended Operating Conditions
Application Method Direct gravure
Application Cylinder 60-150 line
Application solids 20-35% (Recommend 30%)
Pot Life Static 8 hours approximately
Dynamic 24 hours approximately
Dry Coating Weight 3.5-4.0 GSM depending on structure
Drying Section Temperature 55-65° C 65-75° C 75-85° C(three sections)
Laminating Temperature 50-80° C
Cure Time Over 48 hours (45-55° C)
Cleaning Solvent Ethyl Acetate

3. Package
Pack in steel drum normally.
Main agent is 20kg/drum. Hardener is 4kg/drum.

4. Safety & Storage
Store in cool, dry, well-ventilated area away from heat and ignition sources, keep container tightly closed.
Refer to MSDS for more safety information

5. Important notice
These documents we provided are made on the basis of our recent knowledge and experience. All these terms we mentioned are only suitable in normal condition and could be used as references. Please test and affirm before formal production or contact with our technician to some special structures of films and stuffs packed, we do not take on any legal duty for these documents.