EG7175A/B is an EA-based two-component polyurethane adhesive with high solid content and low viscosity, suitable to operate in high-speed machine, widely used in laminating of various treated film like BOPP, PET, NY, PE, CPP, Aluminized Film, etc.

1. Typical features:
Great producing efficient and cost efficient, suitable to laminate the normal packaging films.
Very good flowability, wettability and transitivity, very suitable for high speed dry laminating machine
With the low viscosity, EG7175 greatly decrease the input of solvent to save the cost and raise the producing efficient.
The film laminated by EG7175A/B can resist the Pasteurization.

2. Recommended Operating Conditions
Application Method Direct gravure
Application Cylinder 120-200 line
Application solids 30-50% (Recommend 40%)
Pot Life Static 8 hours approximately
Dynamic 24 hours approximately
Dry Coating Weight 1.8-3.0 GSM depending on structure
Drying Section Temperature 55-65° C 65-75° C 75-85° C(three sections)
Laminating Temperature 50-80° C
Cure Time 24-48 hours (45-55° C)
Cleaning Solvent Ethyl Acetate

3. Package
Pack in steel drum normally.
Main agent is 20kg/drum. Hardener is 6kg/drum.

4. Safety & Storage
Store in cool, dry, well-ventilated area away from heat and ignition sources, keep container tightly closed.
Refer to MSDS for more safety information

5. Important notice
These documents we provided are made on the basis of our recent knowledge and experience. All these terms we mentioned are only suitable in normal condition and could be used as references. Please test and affirm before formal production or contact with our technician to some special structures of films and stuffs packed, we do not take on any legal duty for these documents.