Epoxy potting normal temperature glue

Shijiazhuang HuiXin yuan of trade Co., LTD, epoxy potting glue,

Type: 5201-37;

Features and use: this product is two-component epoxy type insulation potting material, flame retardant sex is good, have UL94-V0, environmental protection SGS certification; Curing room temperature, curing speed, low viscosity liquidity is good, without bubble is easy to operate, the device containing Qin sex, suitable for machinery and small devices potting manual potting; This product is designed for high speed railway track capacitor to the electric equipment form a complete set such as design and develop, GongHuoLiang 20 T/month, after curing the surface light performance and good mechanical properties. Can also be applied to other electronic, electrical components industry of the insulation moistureproof shockproof confidential potting, etc.

The main index:

A B

appearance

Ingredients than (weight points) black liquid

4 palm red liquid

1

Refers to touch the curing time (50 g, ℃) min 38

The bending strength, MPa 78

The above hardness, (shoreD) 76

Method of use:

1, according to the proportion, scales take A certain amount of A material and B material, and to fully mix. Stir well.

2, the mixture should be still 1-2 minutes, stirring the bubble made from as far as possible, if conditions can be TuoPao vacuum.

3, the device should be through the dust removal and heating in addition to deal with the tide, then will the mixture into the device with inside.

4, after pouring sealant for more than 25 degrees at room temperature under 2-4 hours and then placed in 60 degrees heating 2-3 hours for curing. You may also placed 24 hours at room temperature above cured.

Note:

1, before using A material should be about 60 degrees in preheated after full stir well, and then to take.

2, this product belongs to room temperature curable materials should be according to the dosage required with the match with use, shall be with the mixture as soon as possible. (general customer master 15 minutes)

3, if is manual potting, best from one place injection, is good for device inside air out.

4, again after pouring sealant, room temperature when placed potting compound face should avoid cleave dust and other sundry, affect the appearance.

Packing: A material 30 kg, B material 6 kg