Function introduction：
　　Floatation machine is mainly used to select copper, zinc, lead, nickel, gold and other non-ferrous metal, also can be used in the black metallic and nonmetallic roughers. tousegravity-flotation and selection.

Working principle:
　　After coal and potions fully mixing, they will put into the under slot of first room, after the impeller rotating, it formed negative pressure in the cavity, made under the tank and the trough’s pulp put into the mixing zone separately by the impeller’s under suction and up suction. also can make the air into the mixing zone through along the sleeve, pulp, air and pharmacy mixed here. under the effect of centrifugal impeller, the mixtured pulp put into the mineralized zone, the air formed bubbles and crushered. and full contact with the coal particles, then formed to mineralized bubbles, under the effect of stator plate and turbulence, evenly distributed in the trough of body section, and move up into the separation zone, enrichment formed bubble- layer, it will put out by bubble blowing machine, formed coal bubble. the unmineralization coal particles up in the bottom of the trough will mix, mineralizate and separate with second time through the circle hole and the suction hole. in the bottom of the trough, part pulp which is not indrafted by impeller, they will through by middlings box -buried in the ore pulp into the bottom trough of second room. finish the full process of the first room. then go to the third room, such a cycle flotator, the pulp through the last room into the tailings box, then put out the final tailings.

Main technical parameters:

Service Promise

Before-sale services: We guide customers to choose the best applicable device type and provide the advanced, energy-saving and practical technological process, and also we are responsible for the site planning and design.

 On-sale services: products must be inspected strictly before sell, customers are invited to simulate and test machine on-the-spot and raise objections. We will organize delivery according to the clauses stipulated in the contract.

 After-sale services: Our Company will send professional engineers to guide installation, deb ing and training operators until customers are fully satisfied. Moreover, we can design and manufacture products according to customers’ specific requirement.