1. Heating system: Twelve warm areas entire hot blast do not have the lead backflow RF-535 heating system to use the highly effective energy conservation the nickel to iron the radiator pipe, the technological advance, the life are long-time. LEADSMT is in sole possession of the hot blast circulatory system, causes PCB and the primary device being heated even, efficiency high, the elevation of temperature speed is quick.
2. Safekeeping of security system: Selects the big electric current bears the high pressure (450V) the SSR solid state relay not to have the electronic contact output, the security, is reliable, unifies the PID control system unique fuzzy control function and the data acquisition function, monitors in continuously the stove cavity the temperature and the calorific value change, gives off heat the component by the smallest pulse control, fast makes the response, in guaranteed warm controls the precision under the premise, but cannot because the big electric current voltage impact damage equipment, at the same time machine each group of greenhouses have all provided the high temperature pressure resistance protective tube, is the entire wrap system may the persistwelvet effect safe reliable movement.
3. The PID intelligence operation micromanipulator, through the PID intelligence operation, the accuracy control calorific capacity, and the fast response exterior quantity of heat change and is more balanced through the internal control guarantee temperature. The entire wrap system modulation design, will facilitate later the maintwelveance and the service disassembles and assembles.
4. Twelve warm areas entire hot blast do not have the lead backflow RF-535 outer covering and the furnace body may the automatic whole open, are advantageous for inside and outside the furnace body and the chamber are clean and the maintwelveance.
Technical:
A. Controls warm number: 10
B. Warm area number: On 5/ next 5
C. Controls the warm system: Each warm area all independently carries on PID by the advanced intelligent microcomputer to be automatic warm controls; SSR does not have the electronic contact output
D. Warm controls the precision: ± 1 'C
E. Elevation of temperature time: 15min
F. Temperature range: Room temperature -350 'C
G. Gives off heat the origin: Entire hot blast micro cycle hot blast counter-flow way
H. In sets at the automatic time delay heating system, guaranteed the equipment starts when because instantaneous has flowed has pressed the damage equipment controller or the electrical machinery, at the same time guarantees the primary device to weld time is not damaged
I. Conveyer belt: Stainless steel mesh belt
J. Conveyer belt width: 300mm
K. Transfer rate: 0-1500mm/min may freely adjust
L. Alarm system: Indicating lamp ultra warm auto-alarm
M. Cooling system: Powerful fan
N. Power source: Three-phase, 380V (other volt option)
O. Maximum work rate: 14KW
P. Normal Work rate: 4KW
Q. Weight: 300 kg
R. Size: Long * width * high (3000× 670× 1280mm)
