Specialty
1. Direct-link structure for board-loading, tailor-made stainless steel chain conveyor, wear well;
2. Adopting infrared heater to preheat system, pid temperature control and auto-adjusted voltage phase by simulation to improve the temperature accuracy up to ± 1'c. This preheating system is equipped with high-temperature proof glass which can achieve perfect lead-free soldering preheating temperature combining with infrared heater. Its special structure design allows the temperature drop from preheating zone to soldering zone less than ± 5'c;
3. Digital adjustment for spray system by using precise valve which is easy to operate. Japan-made special nozzle, cylinder driving, top and lateral exhausting filter system are available; Auto-proportion fluxer supply system can save the spray;
4. Outer-heating mode for solder pot; All the materials inside solder pot are stainless; Pid temperature control the temperature tolerance up to ± 1'c. Intimate interval design for waves catering to the lead-free soldering; No swings with the first wave;
5. Forcible cooling system to ensure the cooling speed within 3~7 'c/sec;
6. Panel operation, PLC control system;
7. Lower-liquid-level alarming both for fluxer and solder.

Specifications
Dimensions; L2500*w1200*h1650mm
Weight(kg); Approx: 650kg
Startup power; 12kw
Run power; 3.5kw
Control method; Touchscreen+PLC control
Power; AC380V 50Hz/60Hz

Spray system
Push type; Air cylinder
Spray pressure; 0.3-0.5mpa
Spray wash; Auto wash
Flux control; 0-100ml
Ducting dimensions; D 200mm
Exhaust; Up exhaust

Pre-heating system
Preheater mode; IR tube
Preheater zone number; 1
Preheater lenght; 600mm
Preheater temperature; 25'c~250'c
Warm up time; Approx. 15min

Conveyor system
PCB width: 200mm
Conveyor direction; L-r
Conveyor speed; 0-2000mm/min
Conveyor high; 750± 20mm
PCB high; Top 120mm bottom 15mm
Finger; Dual hook finger
Conveyor angle; 4' - 7'

Solder pot system
Solder wave drive; Mtor drive
Pot power; 9kw
High temperature; 350'c
Pot capacity; 250kg
Wave motor power; 1/2hpx2 3p220vac
Solder warm-up time; Approx: 200min

Cooling system
Cooling method; Forced air
Finger cleaning system; Auto

Package
Wood and vacuum package
Time of delivery
Delivery: 15 days after receive down payment.
Pricing:
Our prices are firm for 30 days, f. O. B. Factory, shenzhen, China.
Service:
Normal service is provided from our factory in shenzhen, China.
Terms:
50% down payment with the purchase order, 50% prior to shipment.
Warranty:
Technical devices company warrants all component parts or subsystems for a period of one year from date of purchase against all defects in material will replace during the warranty period.