Specification of PC solid sheet:

PC solid sheet application
1-Day lighting for building roofing/wall;
2-Decorating,advertising, Display Design;
3-Sound insulation wall for expressway, environment;
4-Roofing/wall for agricultrure greenhouse,garden, plant and cultivate;
5-Part of machine,electron, household electrical appliances equipment.

PC solid sheet properties
Light transmission: Fine light transmitting rate approve to 30~ 85%.
Weather resistance: With anti-UV weather treatment on the surface, it can prevent the resin from fatigue and yellowing caused by UV. The anti-UV agent on the surface can change the UV absorbed by chemical bond into visible light, and finely stabilize the photosynthesis of plants.
Impact resistance: With the strength as 250 times of the ordinary glass,30 times as the PMMA sheet, it has less risk of breakage
Fire retardant: Fire retardency is up to B2 level(based on National GB8625-88 testing, without flame or toxic gas).
Temperature toleration: Without deformation within the temperature range from-40°C to +120°C.
Sound insulation: It is the best transparent materials for sound insulation engineerings as expressways,factories,etc..
Portability: Easy for handling and drilling,wo't be breakage whencutting, simple and easy be treated in using.

Notice When transporting, storing,installation:
· Keep PC panels away from wet cement surface or any alkaline/acid base materials.
· Keep frame clean and jointing groove flat and smooth.
· Use neutral glass cement and right gasket. Never use gasket of PVC material.
· Use electrical tools(tungsten carbide saw)to cut,stabilize PC panels to prevent their vibration.
· Choose right thickness of PC panels,allow flexure radius.
· Remain space for expanding,pay attention to inserting depth.
· In case that marks have to be made before cutting,try to mark on protective film;If the marks must be made directly on PC panels,use wax crayon instead of any sharp tool to mark.
· Never pill off protective films until installation is completed.
· Drilling and fixed:
If use self –drilling screws for fixing,the hole must be pre-drilled,the aperture should be 1,5 times larger than the diamenter of the screw,it is s ested to use roof hook for fixing.Do not tighten the screw strongly,otherwise stress will arise,and local crack on the sheet surface will appear.
· About purline span:
For the sheet 1.0mmthick,the span of purline is s ested to be less 1000mm.
For the sheet 1.2mmthick,the span of purline is s ested to be less 1200mm.
For the sheet 1.5mmthick,the span of purline is s ested to be  less  1500mm.