Production Capacity：15-28 pcs/min         
Manufacturable bags types：L  200-1000mm；W 200-500mm
Needed Power Configuration：
1. Film conveying traction driven by AC servo motor：1.5KW  × 2 = 3 KW
2. Up & down sealing driven by Frequency conversion motor：3KW × 1 =3KW
3. Unwinding traction motor：      0.75 KW × 2 =1.5 KW
4. Side sealing configuration：          4KW  × 2 groups =8KW
5. Horizontal heat sealing configuration：4 KW × 3 groups = 12 KW(220V)
6. Control system：          About 1KW
7.Adding spout structure and others：    About 3 KW
Total Electricity consuming：      About 32KW (Triphase AC380V )
8. Air pressure：            0.6Mpa（6KWfcm2）
9. Cooling water：           About 15L/ min
10. The Machine Volume：      About 11m ×1.85m×1.8m
11. The Machine total weight：      About 6.8T
Drive method：
1. Film delivery traction: Driven by AC servo motor
2. Up & down sealing: Driven by Frequency conversion motor
Operating function：
1. Heat sealing：Can be adjusted the speed freely, Can be adjusted the heat sealing time and waiting time
2. The temperature：Contactless SSR output
3. Auto-Counter：Can be preset
4. Conveying the finished products：Can be preset the quantity of supply
5. Punching device：Can be preset the time and set it unintermittent or intermittent
6. Starting mode：High-order stopping function and high-order starting
7. Work mode：Print or non-print
8. The speed of times’ conveying：2 to 10 times（the length reaches to 3000mm will start）
9. Length measurement： It can be measured between the color code and the photoelectricity
10.The choices：You can choose to stop servo motors for conveying raw material then the main motor working only to adjust the cutter up&down.
11.Warning information：
a It will stop if the tracking is lost
b It will have a alarm if the temperature lost 
c Servo motor alarm
d It will have an auto-stop when it is being corrected skew or find out the skew.
e It will have an auto-stop if it isn’t in the admitted area. 
f If will alarm before the quantity of bags is enough
g It will alarm when the main feeding material trestle stop feeding or run out of the material.
The lastest Function：The temperature will felt 5% automatically when the machine is stopped. When the machine is driven again, it will rise automatically too.
The materials species can be processed：
BOPP/CPP ; BOPP/CPE ; BOPP/PET/PE ; BOPP/PET/CPP ; PET/PE ; PET/CPP ; PET/AL/PE ; PET/AL/NY/PE ; NY/PE ; PET/PAPER/AL/PE of composite material and so on.