Manufacturable bags types, specification and speed：

Three sides sealing bag                      L:  150-2400mm；W:  50-400mm

Production Capacity：30-160 pcs/min          Maximun speed：180 pcs/min

Stand-up bag                                 L:  150-500mm；W:  50-600mm

Production Capacity：30-120 pcs/min          Maximun speed：150 pcs/min

Three sides sealing bag with zipper          L:   150-600mm；W:  50-600mm

Production Capacity：30-120 pcs/min          Maximun speed：140 pcs/min

Stand-up bag with zipper                     L:  150-500mm；W:  50-300mm

Production Capacity：30-100 pcs/min          Maximun speed：140 pcs/min

Foldable bottom zipper bag                   L:  120-500mm；W:  150-600mm

Production Capacity：30-100 pcs/min          Maximun speed：140 pcs/min

One piece bottom stand-up bag                L:  150-500mm；W:  50-500mm

Production Capacity：30-120 pcs/min          Maximun speed：150 pcs/min

Four sides sealing penguin bag               L:  150-1500mm；W:  65-500mm

Production Capacity：30-80 pcs/min            Maximun speed：80 pcs/min

Needed Power Configuration：

1. Film conveying traction driven by AC servo motor：     1.3KW  × 2 ＋ 0.85 × 1 = 3.45 KW

2. Up & down sealing driven by Frequency conversion motor：4KW × 1 =4KW

3. Unwinding traction motor：     0.55 KW × 3 = 1.65 KW

4. Side sealing configuration：         4KW  × 4 groups = 16KW

5. Horizontal heat sealing configuration：4 KW × 4 groups = 16 KW(220V)

6. Zipper heat sealing configuration：      4 KW  × 2 groups =  8KW

7. Control system and others：    1 KW

Total Electricity consuming：      About 56KW (Triphase AC380V )

8. Air pressure：            0.6Mpa（6KWfcm2）

9. Cooling water：            About 15L/min

10. The Machine Volume：    About 15m ×2m×1.9m

11. The Machine total weight：     About 7.8T

Drive method：

1. Film delivery traction: Driven by AC servo motor

2. Up & down sealing: Driven by Frequency conversion motor

Operating function：

1. Heat sealing：Can be adjusted the speed freely and the heat sealing time

2. The temperature：Contactless SSR output, display by LCD

3. Auto-Counter：Can be preset

4. Conveying the finished products：Can be preset the quantity of supply

5. Punching device：Can be preset the time and set it unintermittent or intermittent

6. Starting mode：High-order stopping function and high-order starting

7. Work mode：Print or non-print

8. Length measurement： It can be measured between the color code and the photoelectricity

9. The choices：You can choose to stop servo motors for conveying raw material then the main motor working only to adjust the cutter up&down.

10.Warning information：

a It will stop if the tracking is lost

b It will have a alarm if the temperature lost  

c Servo motor alarm

d It will have an auto-stop when it is being corrected skew or find out the skew.

e It will have an auto-stop if it isn’t in the admitted area.  

f If will alarm before the quantity of bags is enough

Options: 

1. Serrated knife；

2. Double cutters；

3. Unintermittent unwinding rolls without stopping the machine

The materials species can be processed：

BOPP/CPP ; BOPP/CPE ; BOPP/PET/PE ; BOPP/PET/CPP ; PET/PE ; PET/CPP ; PET/AL/PE ; PET/AL/NY/PE ; NY/PE ; PET/PAPER/AL/PE of composite material and so on.