Electroslag re-melting furnace is a current production of heat using molten slag into the pool from the power level, the metal droplet liquid washing through the residue, after crystallization in water-cooled crystallizer Into the ESR of a special refining equipment. As the slag to the mixture of liquid crystal effects and good conditions for ESR metal with good Purity, cast structure is uniform, no white spots and the ring-like segregation, very low sulfur content, inclusion of small dispersion and other fine performance.
Therefore, ESR in the medium-sized forgings, rough blocks the production of a monopoly position in the high-quality tool and die steel, duplex steel billet, cold Rolling
Electroslag steel roller is dominated by electroslag casting special parts unique place, the domestic steel output has reached hundreds of tons of slag. Electro slag furnace is particularly Special steel production equipment is essential. DZL-type electroslag Furnace Company making full use of the most mature technology design, manufacturing production stereotypes Products.

Equipment installation condition:
Altitude <1000m
Ambient temperature 5-35 degree
Relative humidity environment 85% (ambient temperature 20 ± 5degree)
Supply voltage fluctuations <± 5percent
Cooling water inlet temperature 5-30 degree
Cooling water inlet pressure > 0.25Mpa
No conductivity and explosive dust, no corrosion and gas that damages electrical insulation,
Power distribution and control equipment need to be installed in the place with a well-ventilated, non-violent vibration.