ER14505 3.6V 2.7Ah
3.6V Primary lithium-thionyl chloride
(Li-SOCl2) Energy Type
High Energy Density
Bobbin AA Cell
For low drain/long term operating
applications requesting superior
voltage response in -55˚C ～+ 85˚C
environments
Cell size references UM3-R6-AA
Alternative models LS14500/LST14500/LS14500C/TL4903/TL5903/SB-AA01
Electrical characteristics
(Typical values relative to cells stored for one year or less at +30˚C max.)
Nominal capacity 2.7Ah
(At 1mA +20˚C,2.0V cut off.The capacity restored varies according to current,temperature,cut off)
Open circuit voltage(At 20˚C) 3.66V
Nominal voltage (At 1mA +20˚C) 3.6 V
Pulse capability:Typically up to 200mA (200mA/0.1second pulses draind every 2min at 20˚C
from cells with 20μA base current,yielding voltage readings above 3.0V.The readings may vary
according to pulse characterics,temperature and cell’s previous history.Fitting the cell with
a capacitor may be recommended in severe conditions.Consult ACT if necessary)
Max. continuous current (at +20˚C) 100mA
Typical Max. continuous current (at +20˚C) 200mA
Storage (recommended) +30˚C(+86˚F)Max
Operating temperature range -55˚C~+85˚C
(High and low temperatur will lower the capacity and load voltage.) -76˚F~+185˚F
Physical characteristics
Diameter(Max) 14.5mm(0.55in)
Height(Max) 50.5mm(2in)
Typical weight 19g(0.622oz)
Available terminal suffix radial tabs,radial pins,axial leads,flying leads