Alternative models LST33600
Electrical characteristics
(Typical values relative to cells stored for one year or less at +30˚C max.)
Nominal capacity 14.5Ah
(At 5mA +20˚C,2.0V cut off.The capacity restored varies according to current,temperature,cut off)
Open circuit voltage(At 20˚C) 3.66V
Nominal voltage (At 5mA +20˚C) 3.6 V
Pulse capability:Typically up to 3000mA (3000mA/0.1second pulses draind every 2min at 20˚C
from cells with 100μA base current,yield voltage readings above 3.0V.The readings may vary
according to pulse characterics,temperature and cell’s previous history.Fitting the cell with
a capacitor may be recommended in severe conditions.Consult ACT if necessary)
Max. continuous current (at +20˚C) 2000mA
Typical Max. continuous current (at +20˚C) 3000mA
Storage (recommended) +30˚C(+86˚F)Max
Operating temperature range -55˚C~+85˚C
(High and low temperatur will lower the capacity and load voltage.) -76˚F~+185˚F
Physical characteristics
Diameter(Max) 34mm(1.34in)
Height(Max) 61.5mm(2.42in)
Typical weight 106g(3.47oz)
Available terminal suffix radial tabs,radial pins,axial leads,flying leads


Key features
>High and stable load voltage
>Superior drain capacity
>Low self-discharge rate
(less than 1% after 1 year of storage
at 20°C)
>Stainless steel container
>Hermetic glass-to-metal sealing
>Notch technology for safety vent is
recommended
>Non-flammable electrolyte
Main applications
>Radiocommunication and other
military applications
>Alarms and security systems
>Beacons and emergency location
transmitters
>GPS equipment
>Metering systems
>Sonobouys
>Led lighting applications
>Others
Storage
>Cells should be stored in a clean
&dry(less than 30% RH) area
>Temp. should not exceed +30°C
Warning
>Do not use if cell casing is mangled
>Do not use different model of cell
in series
>Soldering the tag should be finished
in few seconds
>Do not try to recharge