sleeve anchor with flange nut

(1) Sleeve anchor with hex head bolt single sleeve type

(2) Sleeve anchor with hex head bolt double sleeves type

(3)Sleeve anchor with hex nut &DIN 125 washer

(4)Sleeve anchor with hex nut &DIN 9021 washer

(5)Sleeve anchor with hex nut,plastic red ring,DIN 125 washer

(6)Sleeve anchor with hex nut,plastic red ring,DIN 9021 washer

(7) Sleeve anchor with flange nut type
(8) Sleeve anchor with eye hook bolt type
(9) Sleeve anchor with open eye bolt type

 

Description:                                           

Material:carbon steel 4.8, 5.8, 6.8, 8.8 grade are all available

              stainless steel,garde 304,316

Assemble:serrated hex flange nut,coned-shaped rod bolt,sleeve.                                   

Coating: Cr6 zinc/Cr3 zinc,3-5μm,WZP of YZP.                             

Shell type:all type of hole are available 

Size:a)Metric: 

        anchor diameter:6.5mm,8mm,10mm,12mm,16mm,20mm,working length from 25mm to 300mm 

      b)Inch: 

      Outer diameter:1/4,5/16,3/8,1/2,5/8,3/4,working length from1-3/8 to 6-1/4 

the test pulling force value listed beneath were obtained using 200-250 kgs/cm2 concrete (no aggregated).

 

Applications:

Light to medium-duty into concrete,brick and block

 

Technical Informations:

The screws of the anchor have been manufactured under the DIN-933 standard and their quality-hardness is 6.8(i.e.60 to 80 kg./mm)

→ The washer is wide, which gives a bigger allowance for pleces or structures to be fastened.
→ While performing the fixing of the anchor, the plastic ring gets deformed. which fills and blocks the hole of the plece ofr structure to be fastened;this plastics absorbs material irregularities, and-in addition-it is a useful damp-proof plece to inner mechanism of the anchor.
→ Any screw head available as your requirement.

 

Advantages:

Anchor diameter equals hole diameter-i.e. a sleeve anchor requires a 1/2'' hole

Available in hex head and six other head styles

Available 1/4''-3/4''diameter up to 6-1/4'' length

Zinc plated carbon steel and 304 stainless steel

Provides full 360 hole contact over large area and reduce concrete stress

Heavy -loading capacity

Pre-assembled for faster and easier installations

Dynabolt can be installed through object to be fastened

Sleeve design improves holding power

No pre-spotting of hole necessary