Description: 

Sleeve Anchor/Sleeve Anchor products/steel sleeve anchor/concrete anchor/expanding anchor/sleeve anchor with hex bolt/anchor bolt/sleeve anchor with hex nut,zp/sleeve anchor with hex nut,zp products,/sleeve anchor,/metal anchor/hex nut sleeve anchor

Material:carbon steel 4.8, 5.8, 6.8, 8.8 grade are all availabe/stainless steel,garde 304,316

Assemble:serrated hex flange nut,coned-shaped rod bolt,sleeve.                                   

Coating: Cr6 zinc/Cr3 zinc,3-5μm,WZP of YZP.                             

Shell type:all type of hole are available 

Size:a)Metric: 

        anchor diameter:6.5mm,8mm,10mm,12mm,16mm,20mm,working length from 25mm to 300mm 

      b)Inch: 

      Outer diameter:1/4,5/16,3/8,1/2,5/8,3/4,working length from1-3/8 to 6-1/4 

the test pulling force value listed beneath were obtained using 200-250 kgs/cm2 concrete (no aggregated).

 

Applications:

Light to medium-duty into concrete,brick and block

 

Technical Informations:

The screws of the anchor have been manufactured under the DIN-933 standard and their quality-hardness is 6.8(i.e.60 to 80 kg./mm)

→ The washer is wide, which gives a bigger allowance for pleces or structures to be fastened.
→ While performing the fixing of the anchor, the plastic ring gets deformed. which fills and blocks the hole of the plece ofr structure to be fastened;this plastics absorbs material irregularities, and-in addition-it is a useful damp-proof plece to inner mechanism of the anchor.
→ Any screw head available as your requirement.

 

Advantages:

Anchor diameter equals hole diameter-i.e. a sleeve anchor requires a 1/2'' hole

Available in hex head and six other head styles

Available 1/4''-3/4''diameter up to 6-1/4'' length

Zinc plated carbon steel and 304 stainless steel

Provides full 360 hole contact over large area and reduce concrete stress

Heavy -loading capacity

Pre-assembled for faster and easier installations

Dynabolt can be installed through object to be fastened

Sleeve design improves holding power

No pre-spotting of hole necessary