Magnetic particle clutch ( MPB ) use must be matched with magnetic powder, magnetic powder filled in the magnetic particle clutch ( MPB ) working chamber work, plays the key role, powder material selection, amount, particle size and the correct use of the method, the magnetic particle clutch ( MPB ) using time, working efficiency and work can normally play a very important factor. Fill in the machine of magnetic powder after a period of use, the torque will fall short of that required tension, which must then be replaced with new magnetic powder, magnetic powder is consumable, so the selection of practical magnetic powder can improve work efficiency, prolong the service time, reduce into

The, also can prolong the magnetic powder clutch ( MPB ) use time.

Use:

Suitable for slitting machine, laminating machine, coating machine, printing machinery, food machinery, bag machinery equipment of magnetic particle clutch, brake, uniaxial, biaxial, a hollow shaft, can restore the tension, balance torque. Magnetic powder particles uniform, widely used in papermaking, printing and other industries

Magnetic particle clutch and magnetic specification matching:

Magnetic particle clutch, magnetic powder 39G 2.5kg

Magnetic particle clutch, magnetic powder 60g 5kg

Magnetic particle clutch, magnetic powder 117g 10kg

Magnetic particle clutch, magnetic powder 255g 20kg

Points for attention in use:

1, not in the continuous idling condition, will reduce the powder using life.

2, pay attention to magnetic particle moisture-proof, please use the sealing ring. Magnetic damp, which will lead to the unstable performance and reduce.

Magnetic clutch magnetic characteristics:

In 1, Curie point, up to 1020 degrees, use a long time, the factory production in the complicated environment, up to 8000-12000 hours. High temperature and strong applicability, stable performance, high temperature resistance, wear resistance, no sintering, use does not occur during the fire.

In 2,