KTS International (HK) Ltd.
Silver plastic products is currently as follows:
High thermal conductivity Series: KM1901HK
The thermal conductivity Series: KM1612HK-JS KM1712HK-JSW
Low thermal conductivity Series: KM1012HK-JS
High conductive adhesive
KM1612HK
October 15, 2011 update parameters
Product Description:
KM1612HK-JS is a high thermal conductivity with a high conductivity of the solid crystal plastic, one-component, medium viscosity, room temperature storage for a long time, easy operation, mainly for power type, high-power LED chip solid crystal, suitable for automatic dispenser dispensing.
Model KM1612HK-JS
Before curing
The appearance of silver
Viscosity range of 28000-35000cp
Ion content of Cl-, Na + were ≤ 0.8ppm
After curing
Thermal expansion coefficient α1 = 36.9 μ; m / m ● ℃
Thermal conductivity of 30.0W / m ● ℃
Volume resistivity of 2.0 (x10-5Ω ● cm)
Use
Curing temperature of 175 ℃
Curing time 30-60min
Shear strength greater than 3000psi
Hardness of 80
Impact strength greater than 10KG/6500psi
Instantaneous high temperature 260 ℃
Decomposition temperature of 380 ℃
Storage period 0 ℃ 3 months -15 ℃ 6 months
With increasing temperature, the shorter the curing time can be selected according to the actual situation, high-conductivity silver glue recommended temperature 195 ℃, 30min curing;
Note:
(1) cold storage, use glue to wake up to room temperature before 25 ℃, 2 hours later before use (-15 ℃ - 0 ℃ under refrigeration), boxed please stirring;
Operating time at room temperature up to 36 hours;
(2) to fully cure, there would be off-chip phenomenon.
(3) After the glue is not used, should be sealed refrigeration, or viscosity, larger, re-use when drawing the phenomenon may occur.
(4) can not be mixed with different adhesive types.
If you need more product information, please feel free to contact us..