SFP module

Model:	-
Brand:	OEM
Origin:	Made In China
Category:	Electronics & Electricity / Telecommunication & Broadcasting / Network Communications Equipment
Label:	SFP module , module
Price:	-
Min. Order:	50 pc

Inquire Now

Member Information

Shenzhen Handar Optical Technology CO.,LTD

Free MemberGuang Dong - China

Last Online:14 Sep, 2022

Product Description

Up to 1.25Gb/s dual data links
Hot-pl able SFP footprint
1310nm FP laser transmitter
Duplex LC connector

Up to 20km on 9/125um SMF

Metal enclosure for lower EMI
Single +3.3V power supply
Low power dissipation <600mW
Commercial operating temperature range: 0°C to +70°C

Applications

1.25Gb/s 1000Base-SX Ethernet
1.06 Gb/s Fibre Channel

General

Handar’s HD-S3112-20LCD Small Form Factor Pl able (SFP) transceivers are compatible with the Small Form Factor Pl able Multi-Sourcing Agreement (MSA). They simultaneously comply with Gigabit Ethernet as specified in IEEE STD 802.3 and 1x Fibre Channel as defined in FC-PI-2 Rev. 10.0 .They are RoHS compliant and lead-free.

I. Pin Descriptions
Pin	Symbol	Name/Description	Ref.
1	VeeT	Transmitter Ground (Common with Receiver Ground)	1
2	TX Fault	Transmitter Fault.
3	TX Disable	Transmitter Disable. Laser output disabled on high or open.	2
4	MOD_DEF(2)	Module Definition 2. Data line for Serial ID.	3
5	MOD_DEF(1)	Module Definition 1. Clock line for Serial ID.	3
6	MOD_DEF(0)	Module Definition 0. Grounded within the module.	3
7	Rate Select	No connection required
8	LOS	Loss of Signal indication. Logic 0 indicates normal operation.	4
9	VeeR	Receiver Ground (Common with Transmitter Ground)	1
10	VeeR	Receiver Ground (Common with Transmitter Ground)	1
11	VeeR	Receiver Ground (Common with Transmitter Ground)	1
12	RD-	Receiver Inverted DATA out. AC Coupled
13	RD+	Receiver Non-inverted DATA out. AC Coupled
14	VeeR	Receiver Ground (Common with Transmitter Ground)	1
15	VccR	Receiver Power Supply
16	VccT	Transmitter Power Supply
17	VeeT	Transmitter Ground (Common with Receiver Ground)	1
18	TD+	Transmitter Non-Inverted DATA in. AC Coupled.
19	TD-	Transmitter Inverted DATA in. AC Coupled.
20	VeeT	Transmitter Ground (Common with Receiver Ground)	1

Notes:

Circuit ground is internally isolated from chassis ground.
Laser output disabled on TX Disable >2.0V or open, enabled on TX Disable<0.8V.
Should be pulled up with 4.7k - 10kohms on host board to a voltage between 2.0V and 3.6V.

MOD_DEF(0) pulls line low to indicate module is pl ed in.

LOS is LVTTL output. Should be pulled up with 4.7k – 10kohms on host board to a voltage between 2.0V and 3.6V. Logic 0 indicates normal operation; logic 1 indicates loss of signal.

Pinout of Connector Block on Host Board

II. Absolute Maximum Ratings
Parameter	Symbol	Min	Typ	Max	Unit	Ref.
Maximum Supply Voltage	Vcc	-0.5		+4.0	V
Storage Temperature	TS	-40		+100	°C
Case Operating Temperature	TOP	0		+70	°C
Relative Humidity	RH	0		85	%	1

III. Electrical Characteristics (TOP=25°C, Vcc=3.3Volts)
Parameter	Symbol	Min	Typ	Max	Unit	Ref.
Supply Voltage	Vcc	3.00		3.60	V
Supply Current	Icc		160	300	mA
Transmitter
Input differential impedance	Rin		100		Ω	2
Single ended data input swing	Vin, pp	250		1200	mV
Transmit Disable Voltage	VD	Vcc – 1.3		Vcc	V
Transmit Enable Voltage	VEN	Vee		Vee+ 0.8	V
Transmit Disable Assert Time				10	us
Receiver
Single ended data output swing	Vout, pp	300	400	800	mV	3
Data output rise time	tr			300	ps	4
Data output fall time	tf			300	ps	4
LOS Fault	VLOS fault	Vcc – 0.5		VccHOST	V	5
LOS Normal	VLOS norm	Vee		Vee+0.5	V	5
Deterministic Jitter Contribution	RXΔDJ			80	ps	6
Total Jitter Contribution	RXΔTJ			122.4	ps

Notes:

Non condensing.
AC coupled.
Into 100 ohm differential termination.
20 – 80 %
LOS is LVTTL. Logic 0 indicates normal operation; logic 1 indicates no signal detected.
Measured with DJ-free data input signal. In actual application, output DJ will be the sum of input DJ and ΔDJ.

IV. Optical Characteristics (TOP=25°C, Vcc=3.3 Volts)
Parameter	Symbol	Min	Typ	Max	Unit	Ref.
Transmitter
Output Opt. Power	PO	-15	-	-8	dBm	1
Optical Wavelength	λ	1275	1310	1350	nm
Spectral Width	σ	-	-	3	nm
Optical Rise/Fall Time	tr/tf	-	170	260	ps	2
Deterministic Jitter Contribution	TXΔDJ	-	-	0.07	UI	3
Total Jitter Contribution	TXΔTJ	-	-	0.007	UI
Optical Extinction Ratio	ER	9	-	-	dB
Receiver
Average Rx Sensitivity	RSENS	-	-	-24	dBm	4
Maximum Received Power	RXMAX	0	-	-	dBm
Optical Center Wavelength	λC	1270	-	1600	nm
LOS De-Assert	LOSD	-	-	-25	dBm
LOS Assert	LOSA	-36	-	-	dBm
LOS Hysteresis		0.5	-	-	dB

Notes:

Class 1 Laser Safety, Tested with 50/125µm MM fiber.
Unfiltered, 20-80%.
Measured with DJ-free data input signal .In actual application, output DJ will be the sum of input DJ and ΔDJ.
Measured with PRBS 27-1 at 10-12 BER .

V. General Specifications
Parameter	Symbol	Min	Typ	Max	Units	Ref.
Data Rate	BR	-	-	1250	Mb/sec	1
Bit Error Rate	BER	-	-	10-12		2
Max. Supported Link Length on 50/125μm MMF @ Gigabit Ethernet	LMAX	-	-	2	km	3,4

Notes:

Gigabit Ethernet and 1x Fibre Channel compliant.
Tested with a PRBS 27-1 data pattern.
Dispersion limited per FC-PI-2 Rev. 10.
Attenuation of 0.55 dB/km is used for the link length calculations. Please refer to the Optical Specifications in

Table IV to calculate a more accurate link budget based on specific conditions in your application.

VI. Environmental Specifications

HD 1310nm Commercial Temperature SFP transceivers have an operating temperature range from 0°C to +70°C case temperature.

Parameter	Symbol	Min	Typ	Max	Units	Ref.
Case Operating Temperature	Top	0		+70	°C
Storage Temperature	Tsto	-40		+100	°C

Payment Terms:	TT

Product Image

Img 1

Img 2

Img 3

Send Inquiry to this Member

Shenzhen Handar Optical Technology CO.,LTD

3/F,3 Block,South Makan Industrial Park,Xili Town,Nanshan District,Shenzhen,China

Phone:: 86-755-86654236

Fax:: 86-755-86654231

Contact:: linda (Sales representative)

Mobile:: 13560356643

Related Products of this Company

This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please click here.