Home > Products > Electronics & Electricity > Telecommunication & Broadcasting > Network Communications Equipment

4U chassis for Video to Fiber Converter 14U chassis for Video to Fiber Converter 2
  • 4U chassis for Video to Fiber Converter 1
  • 4U chassis for Video to Fiber Converter 2

4U chassis for Video to Fiber Converter

Model:HD-4U
Brand:OEM
Origin:Made In China
Category:Electronics & Electricity / Telecommunication & Broadcasting / Network Communications Equipment
Label:4U chassis , 4U , chassis
Price: -
Min. Order:1 pc
Inquire Now

Member Information

Detail

Product Description

Product Overview

 

The 4U Chassis can accommodate a combination of up to 18 pieces 1-4 channels video modules or 9 pieces 5-8 channels video modules. The chassis employs a 110/220 VAC Switch Mode Power Supply(SMPS) design, which reduces the possibility of a single module failure causing a shutdown or a major failure of other modules within the chassis. The high reliability and stability ensures that if one module shuts down, the operation of the other modules remains unimpaired. 0ne or two air-cooling fans are installed inside to further strengthen the superior performance of the system and eliminate the necessity for periodic maintenance. Status information can be read through the LED indicators on the installed modules. All of the modules installed in the chassis are hot swappable, which makes it unnecessary to power-down the chassis when replacing modules.

A picture of 4U 19’’ 4U Chassis as follow:

 

 

 

Do not use until you ready this manual carefully .Please follow the installation given by this manual when using .

 

 

Installation

 

1. When you unpack this product package, please check the devices with packing list .

2. Install the 18-slots chassis into a standard 19” cabinet and fix it .

3. Insert the video converter module to the guide rails of the slot .Make sure the power plug of video converter module is inserted in power port of the chassis .When the converter module is fully and firmly fit the chassis, fasten the screws .Follow the above steps, install all necessary converter modules in the chassis, then block up any slots not for use temporarily.

 

4. If the chassis is with dual power supply, please turn on both two power supply ,and they will work together. This will extends the life cycle of the power supply, and can make sure the chassis work normally in case one of them broken down.

 

Specifications

 

Available Module Slots : 18

Video converters module adapted: 1-8 video or 1-8 video+options  

Power in : AC 100 V~260 V  

Power out : DC5V

Dimensions:L482 ,W270,H177 mm   ;19 inches  4U

Shipping Weight: 6.2Kg

 

Environmental

 

Construction: Aluminum

MTBF: > 100,000 hours

Operating Temp: -30° C to +50° C

Storage Temp: -40° C to +85° C

Relative Humidity: 0% to 95% (non condensing)

 

 


Payment Terms:TT

Product Image

4U chassis for Video to Fiber Converter 1
Img 1
4U chassis for Video to Fiber Converter 2
Img 2

Send Inquiry to this Member

Shenzhen Handar Optical Technology CO.,LTD

3/F,3 Block,South Makan Industrial Park,Xili Town,Nanshan District,Shenzhen,China

Phone:
86-755-86654236
Fax:
86-755-86654231
Contact:
linda (Sales representative)
Mobile:
13560356643

Related Products of this Company

This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please click here.

China Suppliers Quick Searching:

Network Communications Equipment Made In China Products

,  

Network Communications Equipment China Suppliers and China Manufacturers