| Model: | GC09 |
|---|---|
| Brand: | LETONG |
| Origin: | - |
| Category: | Chemicals / Coatings, Varnish & Painting |
| Label: | Alcohol Borne , PVC , Ink |
| Price: |
¥25
/ KG
|
| Min. Order: | 500 KG |
| Last Online:09 Jun, 2017 |
*Product Discription:
GC09 ink is alcohol and ester based ink for shrinkable PVC/PET, containing no toluene or ketone.It is widely used to print labels for bottles of mineral water beverage and cosmetics, all kinds of containers and batteries.
*Advantages:
1. Toluence and ketone free;
2. Excellent adhesion and scratch resistance;
3. Excellent heat shrinkage, specially suitable to print shrinkable labels;
4. High color strength, low viscosity, good printing adaptability.
*Suitable substrates:
Heat shrinkable PVC;
Shrinkable PET.
*Technical Data:
| NO. | Norms | Requirements |
| 1 | Color strength/% | 95 ~ 105 |
| 2 | Fineness/μm | ≤ 25 |
| 3 | Viscosity/s | 16 ~ 70 (Zahn Cup #4) |
| 4 | Initial Dry/ (mm/30s) | 20 ~ 80 |
*Recommended percentage of solvents:
| Materials | Fast Dry | Medium Dry | Slow Dry |
| Ethyl Acetate | 80 | 30 | - |
| N-Propyl Acetate | - | 30 | 50 |
| N-Butyl Acetate | - | 30 | 40 |
| IPA | 20 | 10 | 10 |
*Notice:
1.Users can adjust the percentage of solvents according to actual printing conditions. Pay attention to the odor of remaining solvents and possible blocking when using slow dry solvents;
2.Since alcohol is easy to absorb moisture during printing and may cause ink thickening or blocking, we recommend medium dry solvents for color inks and fast dry solvents for white ink and try to keep the printing humidity ≤ 80%;
3.When printing PET, please pay attention to the PET specification and adhesion requirements. We recommend 102PET white for ground printing. Please contact our technical department if there is any question;
4.The validity is normally one year, but can still be used after validity if all norms are tested to be OK.
