| Model: | GC15 |
|---|---|
| Brand: | LETONG |
| Origin: | Made In China |
| Category: | Chemicals / Coatings, Varnish & Painting |
| Label: | Toluene Free , Ink , for PVC Floor |
| Price: |
¥23
/ KG
|
| Min. Order: | 500 KG |
| Last Online:09 Jun, 2017 |
*Product Introduction:
GC15 ink consists of synthetic resins, pigments, additives solvents. It has good fluidity, suitable for gravure printing. It's toluene free with good printing adaptability and color stability in post heat processing.
*Advantages:
1.High color saturation, bright color;
2.Very resistant to light, weather and water;
3.Excellent adhesion, heat resistance;
4.Very good leveling and printing adaptability.
*Suitable Substrates:
Soft PVC films, PVC transparent facemasks, etc.
*Technical Data (GC14 standard ink):
| NO. | Norms | Requirements |
| 1 | Color strength/% | 95 ~ 105 |
| 2 | Fineness/μm | ≤ 25 |
| 3 | Viscosity/s | 9 ~ 50 (#4 Zahn Cup) |
*Recommended percentage of solvents:
| Materials | Fast Dry | Medium Dry | Slow Dry |
| N-Propyl Acetate | 30 | 20 | 20 |
| MEK | 60 | 50 | 40 |
| MIBK | - | 20 | 40 |
| Ethyl Acetate | 10 | 10 | - |
*Notice:
1.GC15 is glossy and soft. Poor anti-blocking property may accur when applied on PVC film.Please pay special attention;
2.The stability of PVC surface layer or other products will change with temperature, pressure or formula, so before using, please test adhesion and other properties to ensure being under safety and product standard;
3.When GC15 is applied on wall paper and floor tile, please choose colors with good light and alkali resistance. And for floor, choose colors with hightemperature resistance to avoid color changing during lamination;
4.When lighter color is required, don't simply add thinner. Please also add 10-20% to avoid worsening of adhesion, gloss,leveling, fluidity or viscosity.
5.During lamination of floor, the temperature and pressure for each mould should be the same to avoid color difference.
