Home > Products > Electronics & Electricity > Magnetic Materials

DX12012050S square chuck electromagnet, rectangular chuck electromagnet, circular arc chuck electromagnet
Length 120 width 120 height 50 (mm)
Voltage can be selected between AC/DC6-220V. The product itself uses DC voltage. If customers need to use AC, they can add rectifiers to the product.
Rectangular suction cup electromagnet: In order to meet the special needs of customers, the suction surface can be designed as U-shaped arc, egg circle, V-shaped and other special suction surfaces. It is suitable for adsorbing various special workpieces or products. It can be designed to seamlessly absorb all kinds of vulgar workpieces. In addition, it is often used to suck up some metal articles in water, because all surfaces of the products are sealed. The outlet is also sealed, so it is waterproof.
The power of the product is related to the electricity rate of the product. Electricity rate refers to the ratio of power-on time to power-off time.
The electrification rate is generally divided into 100%, 50%, 25%, 10%. The higher the electrification rate, the smaller the power and the smaller the suction. Conversely, the smaller the power rate, the greater the power and suction. Because in the effective volume of the product, only a certain amount of power can be made. If the power is high enough, the product will not be able to load, resulting in burnout. The power-on rate is related to the heating problem of the product. The heating of the sucker electromagnet with long time power-on is more serious, so the power should be relatively small.
Product power rate: 100%; 50%; 25%; 10% (power-on time / power-on + power-off time) * 100% = power-on rate, such as: 100% power-on, refers to long-time power-on; 50% power-on, refers to power-on for one second, power-off for one second;
Two basic types of sucker electromagnets, common type and magnetic holding type, are used for different purposes.
General Formula: Magnetism is produced after electrification and degaussing after power failure
Magnetic retention: magnetic force generated after power off, demagnetization after power on
When choosing an electromagnet, we need to supply the following necessary parameters to us
What is the applied voltage? DC or AC?
How long is the on-off ratio of the electromagnet in use? How long is the power off?
What is the attraction of demand?
What is the exposure method and length of the wire?
Other special requirements and so on ____________
Dongguan De'ang Electromagnetic Technology Co., Ltd. is a company specializing in the field of electromagnetic technology. It mainly develops and produces various types of electromagnets, solenoid valves, electromagnetic pumps, etc.
Electromagnets are non-standard electronic automatic control components. If there is no product that meets your requirements and specifications on the website, you are welcome to call for consultation. Our company's technical engineering will recommend the products most suitable for your company, or tailor-made for your company. Welcome you and our company to discuss and research together and make progress together.
Electromagnet manufacturer, Dongguan electromagnet, De Ang electromagnet