Home > Products > Industrial Supplies > Machinery > Filters

Nitto YDRANAUTICS Nitto Group Company Innovation for Customers

Sanitary thermal disinfection roll type reverse osmosis membrane -- sanro-hs sanro-hs

Health grade thermal disinfection roll type reverse osmosis membrane series is specially developed for medical pure water and other high-purity water systems. It has the characteristics of high desalination rate and large water yield respectively. All of them adopt health grade rolling method, no filtering dead corner and realize efficient bacterial control. Sanr o-hs products comply with the FDA CFR titl E21 hygienic standard. General product description * * packaging: all membrane components are vacuum sealed in polyethylene plastic bags, and sodium sulfite with a concentration of no more than 1.0 is added as the protective solution. The vacuum protected membrane components are finally stored in cartons. All membrane elements have been subject to 85C heat stabilization treatment for one hour before leaving the factory. All modules are delivered with a connection adapter, ATD end cover and corresponding sealing ring.

Structure: sanitary grade (fully filled)

Membrane material: aromatic polyamide

Membrane model describes membrane component performance parameters and system application parameters“

A water yield GPD / m2 / D desalting rate 0) application pressure psi (WP E) water yield TDS MOG / L

804 0 4 04 0

Sanr0-hs thermal disinfection and high desalination rate 8800 (33 3) sanr0 hs-8 2200 (8.4) sanr0 HS-4 99.7 180 (1.24) 6.6

Sanro-his2 thermal disinfection, large water production 14000 (53) sanro hs2-8 30011.4) sanro hs2-4 99.6 129 (0.89) 12.5

*Performance test conditions of membrane element: 500mg / xc1 aqueous solution, pressure 225p (155mpe). Recovery rate 15, 77 "f (25C) system application parameter simulation from: 500me / L NaC1 aqueous solution, arrangement 2:21, average water flux 15gfd (26mb). Recovery rate 80m, 77" f (25C) ph-7 8040 element - A - 4040 element a - B C-

B

Module size

Membrane element size a, inches (mm) B. inches (mm) C, inches (mm) membrane area, f (m)

804 0 40.0(1016) 7.90(201) 1.125(28.6) ID 90(8.3)

4040 40.0(1016) 3.98 (101) 0.75(1.9) OD 380(352)

Product use and limitations ^ maximum operating pressure: 600 psig (4.14 MPa) maximum influent residual chlorine concentration (pH > 10.5): < 0.1mg/l maximum influent temperature: 113 "f (55" C) maximum disinfection temperature / pressure: 85 "C / 0.17mpa operating pH range: 2.0-10.0 cleaning pH range: 1.0-12.0 maximum pressure loss of single membrane shell: 60psi (0.41mpa) ^ This is only a general limiting condition. For specific projects, more conservative operating parameters can ensure better performance and longer service life. For details, please refer to the relevant technical data of American Hyde energy. Disclaimer: the information and data provided here are in good faith and in lieu of all warranties. All express or implied warranties, including the warranties of merchantability and fitness for a particular purpose, are hereby acknowledged and excluded. The conditions and methods of use of our products are beyond our control. Hydergone will not be liable for the results or damages arising from the use of such information and data. It is the user's responsibility to determine the suitability of hydergone's products for their specific purposes.