Home > Products > Electronics & Electricity > Other Electrical & Electronic

Safety:

1. Do not disassemble the product without permission
2. Do not use in dangerous environment ( such as flammable and explosive )
3. Do not use in place with plenty of oil or water, High temperature and humidity

Industry Standard and System Certificate:

1. Comply with the limit request of ANSI/ESD S20.20 on calibration test for wrist strap/human body system resistance 
2. Comply with the request of ANSI/ESD S1.1 on auditing test for wrist strap/human body system resistance
3. Comply with the request of ANSI/ESD TR53 on periodic verification method for wrist strap/human body resistance
4. Comply with the limit request of IEC 61340-5-1 on periodic verification test for wrist strap/human body resistance 
5. Comply with limit request of GJB3007A-2009 on periodic verification test for wrist strap/human body resistance

Features:

1. Monitor the real time connection and disconnection of ESD table mat to ground
2. Monitor the real time connection and disconnection of wrist strap to ground, under the guaranteeof double to ground, the path integrity of ESD to ground is more ensured
3. Monitor has the anti-stupidity function, red LED will flash and comes with audible alarm after power monitor on, plug wrist strap and connect proper ground, green LED will illuminate
4. Plug wrist strap into monitor socket, monitor will alarm when wear wrist strap abnormally
5. Monitor will alarm when wrist strap is in open circuit or poor contact
6. Monitor 2 single wrist straps and 1 table mat simultaneously
7. Accuracy: +/- 10%
8. When monitor alarm, red LED light flashes and also comes with buzzer sounds
9. Suitable for any kind of single wrist strap
10. Beautiful appearance, strong anti-interference ability

Installation:

1. Open the package box and find out the screws to install monitor at any convenient place of the workbench
2. Make sure production line’s grounding is proper
3. Connect remote box into monitor and table mat into monitor
4. Plug power adapter into monitor
5. Power monitor on, red LED light will illuminate and buzzer sounds last 2-4 secs
6. Green LED light will flash after plug in wrist strap
7. If wear wrist strap abnormally by operator, LED light will turn red and together with alarm
8. If disconnect table mat cord, table mat LED light will turn red and together with alarm
9. Connect table mat cord again, LED will turn green and buzzer sounds stop
10. Monitor can be used after function testing is passed