Home > Products > Electronics & Electricity > Other Electrical & Electronic

Point of Use Ionizing Blower_DC0601C 1Point of Use Ionizing Blower_DC0601C 2Point of Use Ionizing Blower_DC0601C 3
  • Point of Use Ionizing Blower_DC0601C 1
  • Point of Use Ionizing Blower_DC0601C 2
  • Point of Use Ionizing Blower_DC0601C 3

Point of Use Ionizing Blower_DC0601C

Model:DC0601C
Brand:ESDMAN
Origin:Made In China
Category:Electronics & Electricity / Other Electrical & Electronic
Label:DC0601C , ESDMAN , Ionization
Price: US $160 / pc
Min. Order:1 pc
Inquire Now

Member Information

Detail

ESDMAN CO.,LTD

Free MemberGuang Dong - China
Last Online:20 Jul, 2022

Product Description

Safety:

1. Do not disassemble the product without permission.
2. Do not use in dangerous environment. ( such as flammable and explosive )
3. Do not use in place with plenty of oil or water, high temperature and humidity, especially in places with condensation.

Product Description:

1. Adopting steady-state DC ionization technology, it is generally used to deal with static electricity problems during assembly, testing, and packaging. It can also be installed in equipment to provide rapid static elimination in a limited space to solve static electricity generated during high-end manufacturing processes.
2. Steady-state DC ionization technology has the following advantages:
 ①Compact body design, light weight
 ②Both sides buckles design, can lock the blowing angle 
 ③Stable ion balance
 ④Longer cleaning and maintenance intervals
 ⑤No need for grounding, easy installation
 ⑥The emitter tip has high-voltage shielding technology to avoid electric field induction charging, In the case of low wind speed, it can provide faster static dissipation speed, low wind speed and low noise, which will not cause much noise to the production environment, making the operator more comfortable.

Installation:

Insert the DC head of the attached power adapter into the power port on the back of the instrument, connect the power adapter to the AC110-220V socket, the POWER green indicator light is on, and the instrument is running normally.

Installation Method:

1. Use M6 screws and nuts to fix the bottom bracket of the fan at an appropriate position that needs to eliminate static electricity. 
2. When using more than two ionizers, make sure to keep a distance of at least 100mm between the two. 
3. The distance from the air outlet needs to be at least 100mm away from static objects, and reverse charging may occur within 100mm.
4. The ionizer is at least 300mm away from the metal conductor, and the air inlet is at least 150mm away from the wall and other objects.

Routine Maintenance ( Cleaning of the discharge emitter ) :

1. After the discharge emitter is used for a long time, there will be dust and other pollutants in and around the discharge emitter.
2. Use cotton swabs to remove contaminants.
3. The discharge emitter should be cleaned regularly ( approximately 100 hours of use need to be cleaned once ) . When the pollution is serious, the cotton swab can be cleaned with alcohol. Be careful not to damage the discharge emitter when cleaning.

Abnormal Alarm:

When the high pressure is abnormal, the red light of ALARM will prompt the operator to overhaul the fan.


Product Image

Point of Use Ionizing Blower_DC0601C 1
Img 1
Point of Use Ionizing Blower_DC0601C 2
Img 2
Point of Use Ionizing Blower_DC0601C 3
Img 3

Send Inquiry to this Member

ESDMAN CO.,LTD

Rm 505, Bldg A, 5th Floor, No. 2004, Xihuan Road, Shatou Community, Shajing Ave, Baoan Dist.,Shenzhen,518104,China

Phone:
86-0755-8524 3764
Fax:
中国
Contact:
Phoenix Hu (Sales)
Mobile:
15818753657

Related Products of this Company

This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please click here.

China Suppliers Quick Searching:

Other Electrical & Electronic Made In China Products

,  

Other Electrical & Electronic China Suppliers and China Manufacturers