Home > Products > Electronics & Electricity > Other Electrical & Electronic

Safety:

1. Do not disassemble the product without permission
2. Do not use in dangerous environment ( such as flammable and explosive )
3. Do not use in place with plenty of oil or water, High temperature and humidity

Industry Standard and System Certificate:

1. Comply with the limit request of ANSI/ESD S20.20 on calibration test for wrist strap/human body system resistance 
2. Comply with the request of ANSI/ESD S1.1 on auditing test for wrist strap/human body system resistance
3. Comply with the request of ANSI/ESD TR53 on periodic verification method for wrist strap/human body resistance
4. Comply with the limit request of IEC 61340-5-1 on periodic verification test for wrist strap/human body resistance 
5. Comply with limit request of GJB3007A-2009 on periodic verification test for wrist strap/human body resistance

Features:

1. Real time monitor single wrist strap grounding function 
2. Monitor has OFF function, dial switch to ON, red light illuminate and monitor will turn green while connect wrist strap
3. Plug wrist strap into monitor socket, monitor will alarm when wear wrist strap abnormally
4. Monitor will alarm when wrist strap is in open circuit or poor contact.
5. Monitor will alarm when grounding cord is in open circuit accidentally
6. Monitor 1 single wrist strap and itself grounding cord
7. Wrist strap alarm limit: 1.2 M ( factory preset )
8. Accuracy: ± 10%
9. When monitor alarm, red LED light flashes and also comes with buzzer sounds.
10. Suitable for any kind of single wrist strap
11. Beautiful appearance, strong anti-interference ability

Installation:

1. Open the package box and find out the screws to install monitor at any convenient place of the workbench 
2. Connect yellow/green cord into factory grounding cord
3. Plug power adapter into monitor
4. Power monitor on, red LED light will illuminate
5. Green LED light will flash after plug in wrist strap
6. If monitor’s ground cord is interrupted artificially or accidentally, LED light will turn red with buzzer alarm 
7. If wear wrist strap abnormally by operator, LED light will turn red and together with alarm
8. Monitor can be used after function testing was passed