Home > Products > Transportation > Transportation Facilities > Roadway Safety

Overall dimensions with mounting kit: 1305x460x200 mm

Weight of additional section: 2 kg

Input voltage of control signals: 220V +-20% (180 - 260V)

Frequency of supply voltage: 50 Hz

Protection class: IP 54

Operating temperature range: -60 - +60 °C

Indicator type: Ultra-bright LEDs

Additional section: Decreasing scale on the perimeter of the signal section

Power consumed by traffic light sections, not more: Red: 30 W Yellow: 35 W Green: 30 W

Additional section: 20 W

Maximum power consumed by the traffic light: 120 W

Availability of interfaces: Ethernet

Video camera: 2 MP, 1/2'' CMOS Sony Exmor R, 0.001 lx (day)/0.0005 lx (night)

Housing Material: ABS/Acrilat

Warranty period: 1 year

Service life: 5 years

 LED traffic light with built-in video camera consists of 3 LED modules: red, yellow, green, located in a common housing made of ABS plastic and an additional section. The yellow module combines a yellow traffic signal with a 2.5-digit two-color countdown scoreboard: a timer with numbers of red color, turned on simultaneously with the red signal, shows the time remaining until the end of the forbidden signal. The timer with green digits, activated simultaneously with the green signal, shows the time remaining until the end of the permissive signal.

The red and green modules contain a circular descending scale around the signal section. The decreasing scale operates synchronously with the countdown board timer, decreasing in proportion to the remaining signal time. For signal durations longer than 25 seconds, the descending scale is fully illuminated at the beginning of the cycle and begins to dim in proportion to the last 23 seconds of the cycle. In the inner planes of the housing are located power supply and traffic light control board. There are also several technological compartments with separate covers for installation of additional units and equipment. The housing is mechanically fastened to the front panel of organic glass with a frame of anodized aluminum profile.

Protection of the traffic light housing from moisture and dust is provided by profile rubber gaskets insulating the end surfaces around the entire perimeter of the housing, as well as the covers of compartments for additional equipment.

The additional section is attached to the traffic light frame at the manufacturing plant, after which the traffic light with the additional section is a single structure (product).

The signal “red ring” in the additional section is switched on at the moment when the green arrow is not lit (forbidden signal). This signal informs the driver about the presence of an additional section at the traffic light and serves as an indicator that the additional section is in good working order and the maneuver indicated by it is indeed prohibited.

At the same time, there is no need to install a white screen behind traffic lights with additional sections.

Around the “red ring” of the additional section there is a two-color circular descending scale, glowing red on the forbidden signal of the additional section and green on the permissive signal. The scale decreases in proportion to the remaining time of the signal. For signal durations longer than 20 seconds, the waning scale is fully illuminated at the beginning of the cycle and begins to wane proportionally in the last 20 seconds of the cycle.

Traffic lights SMARTLIGHT, being intelligent devices, are able to independently determine the duration of the included signals for 2-3 cycles of traffic lights, as well as adjust to the changing time of switching on the “green” and “red” signals when changing their duration in the process of operation.