Home > Products > Transportation > Transportation Facilities > Roadway Safety

Input voltage of control signals: 220V (180-260)

Frequency of supply voltage: 50 Hz

Protection class: IP54

Operating temperature range: -60+60ºС

Power consumed by traffic light sections, not more: Red: 25 W Green: 25 W

Maximum power consumed by the traffic light, not more: 120 W

Availability of interfaces: Ethernet

Video camera: 5 MP; 1/2.8 Day/Night; 0.006 lux (day) / 0.003 lux (night)

Housing Material: ABS/ Acrilat

Warranty: 1 year

Service life: 5 years and more

Country of Origin: Russia

Pedestrian traffic light P.1 II SMARTLIGHT with additional graphic countdown, built-in video surveillance camera and a module of additional illumination, operating in the mode of waiting area illumination / crosswalk area illumination

Intelligent pedestrian traffic light P.1II-OV iLum SMARTLIGHT consists of two LED modules located in a common housing made of ABS-plastic. In the inner planes of the housing are located power supply unit and traffic light control board. The housing provides several technological compartments with separate covers for installation of additional units and equipment. The enclosure is mechanically fastened to the front panel made of organic glass with the help of an anodized aluminum profile frame. The built-in video camera is located in the lower part of the traffic light, under the green module. In the lower part of the frame, an LED light is attached to the profile under the traffic light, which works together with the traffic light at night. The luminaire, depending on the signal of the traffic light, illuminates the approach to the crosswalk from the sidewalk or the crosswalk itself on the roadway. The traffic light and the luminaire are a single product.

Protection of the traffic light housing from moisture and dust is provided by profile rubber gaskets insulating the end surfaces around the entire perimeter of the housing, as well as the covers of compartments for additional equipment.

The pedestrian traffic lights have two LED modules with red and green pedestrian silhouettes, and a circular descending scale around the pedestrian silhouettes. The section with the green silhouette contains a red 2.5-digit seven-segment indicator that turns on simultaneously with the red silhouette to report the time remaining until the end of the red signal. In the section with a red silhouette there is a green 2-digit seven-segment indicator, switched on simultaneously with the green silhouette, to report the time remaining until the end of the green signal.

The descending scale operates synchronously with the countdown timer, decreasing in proportion to the remaining signal time. For signal durations longer than 20 seconds, the waning scale is fully illuminated at the beginning of the cycle and begins to wane proportionally in the last 20 seconds of the cycle.

Traffic lights SMARTLIGHT, being intelligent devices, are able to independently determine the duration of the included signals for 2-3 cycles of traffic lights, as well as adjust to the changing time of the inclusion of “green” and “red” signals when changing their duration in the process of operation.

All SMARTLIGHT pedestrian traffic lights are equipped with a sound support device (USS), which is designed to audibly signal a safe period of crossing the roadway by pedestrians. The sounder operates in night and day modes with different sound signal volume levels. The time of transition between day and night modes can automatically adaptively change during the year, using information from the built-in light sensor, or according to a programmed schedule, according to GPS coordinates of the place of installation of the traffic light.