Features and Specification:

LED: Cree XM-L U2 LED with a lifespan of 100000 hrs.
Max 1147 lumen output using 3 * 18650 batteries.
Level 1: 0.5 lm. 2000 hours; Level 2: 21 lm. 140 hours; Level 3: 146 lm. 22
hours; Level 4: 366 lm. 9 hours; Level 5: 620 lm. 5 hours; Level 6: 1147 lm.
2 hours; Standby: 65 uA; Strobe: 1147 lm. 4 hours.
Working voltage: 4V to 13V.
Max runtime: 2000 hours.
Max beam distance: 700 meters.
Peak beam intensity: 75000cd.
Impact resistant: 1.2 meters.
Waterproof to IPX-8 standard, 2M.
Size: 186(Length)x76.2(bezel diameter)x49(body diameter) unit mm.
Weight: 452.80g without battery.
Aircraft grade aluminum body structure.
Premium type III hard anodized anti-abrasive finish.
Ultra-clear tempered glass lens with anti-reflective coating.
Momentary forward click tactical switch.
Strobe mode for tactical and emergency use.
Smooth reflector for max light output.
Highly focused beam for maximum distance.
Tactical knurling for firm grip.
Streamlined body design.
Mechanical reversed polarity protection design for batter y carrier.
Intelligent highly efficient circuit board design for max performance
and long run time.
Specially designed for Military, Law Enforcement, Self-defense,
Hunting, Search & Rescue and Outdoor activities.
Intelligent temperature controlled light output for user safety.
Operation
Batter y Installation
Screw the tail cap off in counter-clockwise direction.
Remove the battery carrier.
Put batteries in batter y carrier, with the negative end (flat one) of the
battery pointing to the spring.
Insert the battery carrier back into the body.
Screw the tail cap back tightly in a clockwise direction.
Tactical Lighting/Momentar y On
Half press the tail cap button, the flashlight will turn on temporarily;
release the button at the tail cap, the flashlight will turn off.
ON/OFF Switching
-Switch ON: Press the tail cap button down completely until a "click"
sound is heard and flashlight turns on.
Switch OFF: Press the tail cap button down a second time until a "click"
sound is heard and light is turned off.
- Mode Switching
With the light turned on, rotating the control ring to select six levels of
brightness, standby and strobe smoothly.