IR LED controller

Model:	H805SB
Brand:	HCX
Origin:	Made In China
Category:	Consumer Electronics & Lighting / Lighting / LED Lighting
Label:	led controller , IR led controller
Price:	US $30 / pc
Min. Order:	1 pc

Inquire Now

Product Description

1.This controller can control up to 4096 Pixels/dots, it is compatible to following Chips driver

2：At present H805SB can control the following IC such as:LPD6803、LPD8806、LPD6813、LPD1109,APA101、APA102、BS0825、TLS3001、UCS6909、UCS6912、UCS1903、UCS190,UCS1912、TM1812、TM1809、TM1804、 TM1803、 DMX512、 D705、 D715、P9813、 SM1671,WS2801、WS2803、WS2811、SD600 etc.

3. This control have 3 different control mode which you can select;

DATA"DAT" Mode. This are program or pattern are download from computer software and stored in the SD card after you have inserted the card. is can play the program.

Monochrome Mode or single Color Mode-the program to adjust one color brightness and shade of single color.

Color Mode or Mix Color-the program to Mix the color of RED,GREEN and BLUE with different gray, three colors can also be use together to make different colors and brightness of other colors.

4.SD card can be formatted with FAT16 and FAT32 use Max 4G SD card.

5. DAT Mode - can 64 different program store in the SD card, it play program based on filename alphabetical order.

REMOTE CONTROL OPERATION:

1. Using DATA file:

Press DAT on the remote control the receiver will display "01"as first file in the card, you can select program by pressing"+" for the next file and press"-" for previous file or you can use the keypad to select the desire number of the file and then press "Confirm" to play the desire file.

2. Clock

press Clock for signal to change IR frequency the units fo MHz then press Confirmation.

3. Speed:

press speed the adjust the speed from 1 to 200 unit frame per second or press "+-" to increase or decrease speed then press confirmation to stored the program speed.

4. Brightness:

Press Brightness key then select key then select key 1 to 32 or press "+-" for desire brightness then press confirmation stored program.

5. Play All:

press "Play all" to play data program

6.Selesct Play

press select play to choose desire program to be played.

7. Password:

Press select play to choose desire program to be played.

8. Sing le Color:

Press single color to adjust individual color, press "RED" to adjust its color to the level of brightness you desire or GREED and BLUE.

9. Mixed Color:

Press mixde color to blending colors to create new color adjust individual brightness of each color by "+" to increase brightness or "-" to reduce the brightness of such color.

The controller interface definitions:

Powered supply input voltage for the DC6-24V, if you need DC 5V Powered, Please order instructions.